Sheet Edge Inserts provide strong threads for metal sheets that are too thin to be tapped. They are fastened to the edges of thin sheets and are a good alternative to self-clinching inserts.
To Install;
1. Install insert notch into the side of the panel opening
2. Rotate spring leg of insert toward the panel. This compresses the spring leg, allowing it to pass through the notch in the panel
3. Leg will snap back to its normal position, securing the insert into the panel.
Please Note: The internal thread requires a screwdriver for installation.
The insert can be removed after installation, by simply pinching the spring legs together and rotating.
For large volumes and customised products, add to your cart and click request a quote, orcontact usand we will respond within 2 working days.
Use the filters or search below to find what you're looking for
Price range | Availability | Thread Size | Material | Mounting Hole Diameter | Maximum Panel Thickness | View | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
0.1795 USD - 0.199 USD | 7432 In stock |
M4
|
PA
|
0.312 in
7.9 mm
|
0.091 in
2.3 mm
|
||||||
0.1706 USD - 0.189 USD | 1152 In stock |
6-32
|
PA
|
0.312 in
7.9 mm
|
0.094 in
2.4 mm
|
||||||
SEI-4 | 0.23 USD - 0.2548 USD | 3215 In stock |
M5
|
PA
|
0.350 in
8.9 mm
|
0.094 in
2.4 mm
|
|||||
0.23 USD - 0.2548 USD | 5936 In stock |
M6
|
PA
|
0.350 in
8.9 mm
|
0.094 in
2.4 mm
|
||||||
0.218 USD - 0.2415 USD | 40032 In stock |
M3
|
PA
|
0.312 in
7.9 mm
|
0.091 in
2.3 mm
|
||||||
Unfortunately your session was timed-out due to inactivity. Please login or reload page to continue