Angled Square Inserts
Angled Square Inserts offer an easily assembled, durable and long lasting part. They are perfect for tube ends or uneven surfaces and for tubes which meet surfaces at an angle
Chrome-Plated Rectangular Inserts
Chrome-Plated Cap Rectangular inserts and Chrome Rectangular inserts offer two different chrome finish insert options. Chrome Plated Cap inserts are ribbed for ease of insertion and positive fit and the chrome plated cap provides enhances aesthetic appearance. They are suited to a wall section of 1.0-2.0mm. The Chrome inserts provide an equally neat finish and have a high gloss chrome coating. They are available in both chrome or dark chrome coatings
End Tips Caps are versatile for a multitude of uses. They add protection from damage and ingress, as well as a neat finish to complete a look. Different materials and colours are available for a wide range of application uses.
Finned Hole Plugs
Ideal for use in thin-walled copper tube, our Finned Plugs are quick to fit and easy to remove. Finned Plugs prevent ingress of dirt into tubing, and feature a small unobtrusive pull-tab. Offered in blue LDPE. Prevents ingress of dirt into tubing. Quick to fit and remove. Small unobtrusive pull-tab. Ideal for use in thin-walled copper tube.
Flexible End Caps - Acid Resistance
Flexible End Caps - Acid Resistance are made of Black Thermoplastic Elastomer (TPE) providing good flexibility to protect threads and non threaded tips. The design come with a hanging tab to work with hanging hooks.
Flexible End Caps - Oil and Grease Resistant
Flexible End Caps - Oil and Grease Resistant are made of Vinyl providing good flexibility to protect threads an non threaded tips and is highly resistant to shredding. The green PVC can be used with oil and grease application. The design come with a hanging tab to work with hanging hooks.
Flexible End Caps - Standard
Flexible End Caps - Standard are suitable for a multitude of applications. The range comes in different sizes to suit Metric, BSP and UNF threads. The PVC material is flexible to ensure a tight fitting.
Heavy Duty Pipe Caps
These Heavy Duty Pipe Caps are suitable for nominal pipe sizes and are a low cost, but high quality option. They are made from Black or Yellow Polyethylene. The internal ribs ensure a tight fit and release after pressure build up. The caps are available with or without a vent hole.
Horizontal Inserts for Rectangular Inserts
Horizontal Inserts for Rectangular Tubes are available with various options for joining rectangular tubes. There are 4 types available. Type 1 has 1 level but 2 directions. Type 2 has 1 level, 2 directions and has a top thread. Type 3 has 1 level, 2 directions and a bottom thread and type 4 has 1 level, 2 directions and 2 threads
Non-Threaded End Caps
Our Non-threaded End Caps are available in wide selection of sizes and are made from Low-Density Polyethylene, in blue. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement.
These Black Oval Ferrules provide a neat cover to oval shaped tubes. They can be used for finishing, protection and are essentially applied to cover sharp tube edges. The PVC material offers flexibility for easy fitting and removal.
Oval Inserts & Glides
Oval Inserts & Glides can be used as high quality tube ends or glides. The external ribbed collar ensures a secure fit, while the ends finished with spark eroded Polyethelyne (PE). Available in a range of colours.
Low Profile Weld Cups add strength and protection to fit standard metal base glides. The smooth material protects floors and reduces noise levels while fully encapsulating and protecting the metal base.
Pipe Bevel Edge Protectors and Plugs
Our Bevel Protectors are designed for use with a large range of pipes . The Bevel Protectors combine with Pipe Plugs in complementary sizes for optimal protection and pipe closure. The steel Bevel Protector keeps the pipe plug firmly in position during handling, transportation and storage. The bevel protector is easy to apply by pushing onto the pipe-end and hammering down the clamping system. Pipe plug has depth of at least 100 mm to accept crane hook. Available with a corrosion inhibitor to protect inside pipe against damage from moisture. We recommend that you contact our office to select the clamping system to fit your requirement.
Push-in Plugs, also referred to as bungs are a versatile option to blank a variety of holes or bores during transportation, paint process or on a finished product. These LDPE plugs protect the handler from rough surfaces from cut holes. The Bung can also be used to protect internal threads. Additionally, the plugs can be used to mask and protect holes during a low temperature paint process. Available with either a flat or domed head these plugs are also offered in a variety of colours so can be used for colour identification or to match a finished product aesthetics. The advantage of these plugs is that they are simple to apply, with a simple push in motion.
Push-On Tilt Glide
Push -On Tilt glides are swivel glides with spring insert. Insert and Glide come as a one piece to facilitate the application. The Glides are designed with a tube end cap for a clean finish and have a ball and socket joint to create a tilt action. The range offers a choice of base to suit various applications.
Recessed Pipe Caps
Made from Low-Density Polyethylene our range of Black Recessed Pipe Caps help protect pipe bevels and internal walls from corrosion and damage. The heavy-duty design accepts crane hooks for moving pipe and are available with or without a vent hole.
Rectangular Inserts & Glides
Rectangular Tube Inserts are ideally suited for most popular sizes and gauges of rectangular tubes. They are available in a wide range of sizes, colour and finishes. The Inserts are used to protect the sharp edge of metal tubes. The choice of colour allow an aesthetic finish.
Rectangular Inserts & Glides - Lightweight
Lightweight Rectangular Inserts are ribbed for ease of insertion and positive fit. They provide a neat and attractive finish and have a gauge size of 1.0mm-2.0mm
Rectangular Threaded Inserts & Glides - Metal
Rectangular Metal Threaded inserts come in a variety of options. All-Metal threaded inserts are ideal for heavy duty applications and are made from a cast aluminium alloy. Standard Threaded Inserts can be used with either adjustable feet (SR 1572) or adjustable tilt glides (SR1575). For the rectangular inserts M8 and M10 thread sizes are available and they are suitable for wall thicknesses of 1.0-2.0mm. Metal-Threaded Inserts are another heavy duty insert option. There are ideal for use with adjustable feet, tilt guides and castors. M8 or M10 threads with mild steel holding nut provides a strong fixing. The metal thread allows for a smooth repeatable adjustment and the two piece mouldings fit neatly together to fit into the tubes
Ribbed Pipe End Caps
These Ribbed Pipe End Caps are non-threaded and are available in either Red or Yellow, we offer a wide range of sizes to suit your application. They are ideal for protecting threaded or non-threaded pipes, tubes or rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement.
Ribbed Pipe-End Plugs
Ribbed pipe plugs are available in two styles with flexible ribs of different diameters to fit multiple schedules of NPT and drill pipe. The straight wall on the plug’s outside diameter provides a secure friction fit with the mating pipe’s inside diameter providing excellent protection against contaminants entering the pipe.
Round End Caps - Standard
Standard Round End Caps are non-threaded and available in a wide range of sizes. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement. All are available in a wide range of sizes