Fibre Bend Limiting Tubing - Clips, Standoff
Fibre Bend Limiting Tubing can be mounted using Tube and Pip Clips such as the Standoff Clips. These are simple to install and come in two different material types
Fibre Bend Limiting Tubing - 1 to 4 Breakout
The 1 into 4 Optical Fibre Manifold enables small multiple fibrecables with aramid and similar strength reinforcement or central. GRP strength member to be mechanically and securely terminated. The manifold is stackable, and retains tubes greater than 100N. A development kit is also available that contains all adapters, OFM-4-05-19BLK
Fibre Bend Limiting Tubing - Clips, Hinged Top Lock
Fibre Bend Limiting Tubing Clips are snap fitting for easy installation and allow the running of Fibre Bend Limiting Tubing along a panel, enclosure or racking unit. They are hinge fitted which also aids the ease of installation and removal
Fibre Bend Limiting Tubing - Clips, Snap in
Fibre Bend Limiting Tubing can be mounted using saddles such as the Snap in Clips. These are simple to install and come in two different types
Fibre Optic Connector Boots
The Fibre Management range provides Fibre Boots which provide strain relief for Micron Fibres. They provide added protection to the fibre while routing through a hole
Fibre Cutout Adapters
Fibre Cut-out Adapters convert a hole cut-out for an SC connector into a hole cut-out for an ST connector. The Optical Fibre Duplexer enables cable with aramid strands to be broken out and mechanically terminated.
Fibre Bend Limiting Tubing
Optical Fibre Bend Limiting Tubing offers the ultimate protection to fibres eliminating problems such as crushing, kinking and micro bending whilst supplying an entire self-managing solution to managing the routing of fibre
Fibre Bend Limiting Tubing - Clips, Slotted
Optical Fibre Slotted Multi Brackets are designed using Miniflex technology. They are used at distribution points where orderly fibre management, protection and strain relief are required. An additional security feature allows fitting of a cable tie around the part which prevents removal of any retained tubes. They will hold a maximum of 12 tubes
Fibre Bend Limiting Tubing - Duplexer
These fibre duplexors enable cables with aramid strands to be broken out and mechanically terminated. Tube retention is greater than 100N.
Connector Dust Caps with Lanyard
Fibre Dust Caps and Dust Caps with Metal Chain prevent unwanted foreign bodies and dirt getting into fibres and wires.