Non Locking

 (61 product groups)

Need a Quote?

For large volumes and customised products, add to your cart and click request a quote, or email sales@essentracomponents.co.za and we will respond within 2 working days

Filter Products

  • of 3
List Grid

4999 Double Sided Fingerlift Box Sealing Tape - Bobbin

In stock - Delivery conditions may apply, visit our FAQs In production

4999 is a double-sided box sealing tape supplied on a bobbin for use where adhesive is applied to long production runs without the need to change rolls. The film carrier is coated both sides with an aggressive hot melt rubber-based adhesive. Constructed with a thicker liner to assist in the ease of liner removal. Specifications: Bobbin. Applications: Box Sealing. Maining Boxes.

{0} variants (Filters applied) {0} variants (No filters applied)

Adhesive/Screw Mount Wire Saddle

In stock - Delivery conditions may apply, visit our FAQs In production

Cables slide into wire saddle and are kept in place without the need of a locking mechanism. Round wire saddle means a wide range of cable diameters are suitable. Available in both a screw mount and adhesive mount version.

{0} variants (Filters applied) {0} variants (No filters applied)

Cable Clamps - Plug In, Round Wire Saddle

In stock - Delivery conditions may apply, visit our FAQs In production

Cables slide into wire saddle and are kept in place without the need of a locking mechanism. The snap-in application adds to the ease of installation. The round wire saddle means a wide range of cable diameters are suitable. Available in both UL94 V-2 and UL94 V-0 materials. Available in Natural and Black colours.

{0} variants (Filters applied) {0} variants (No filters applied)

Castor Wheels - Fixed Plate

In stock - Delivery conditions may apply, visit our FAQs In production

Fixed Plate Castor Wheels can be used as a general-purpose caster where full 360-degree rotation is required. The plate has mounting holes to secure the caster to your application while the brake allows for a full stop when engaged.

{0} variants (Filters applied) {0} variants (No filters applied)

Castor Wheels - Levina

In stock - Delivery conditions may apply, visit our FAQs In production

Levina Castor Wheels can be used as a general-purpose caster where full 360-degree rotation is required. The bolt hole in the caster frame allows for secure mounting to bolt threads. Complete your project by selecting from our range of suitable Stem Fittings and Castor Plates.

{0} variants (Filters applied) {0} variants (No filters applied)

Castor Wheels - Linea

In stock - Delivery conditions may apply, visit our FAQs In production

Linea Castor Wheels can be used as a general-purpose caster where full 360-degree rotation is required. The bolt hole in the caster frame allows for secure mounting to bolt threads. Complete your project by selecting from our range of suitable Stem Fittings and Castor Plates.

{0} variants (Filters applied) {0} variants (No filters applied)

Castor Wheels - Multifunctional Levelling

In stock - Delivery conditions may apply, visit our FAQs In production

Castor Wheels - Multifunctional Levelling incorporate the feasibility to move equipment easily with a high-grade nylon wheel. This caster has 360-degree freedom of motion and precision hand leveling adjustment.

{0} variants (Filters applied) {0} variants (No filters applied)

Castor Wheels - Swivel Bolt Hole & Stem with Brake

In stock - Delivery conditions may apply, visit our FAQs In production

Castor Wheels - Swivel Bolt Hole & Stem With Brake can be used as a general-purpose caster where full 360-degree rotation is required. The bolt hole in the caster frame allows for secure mounting to bolt threads.

{0} variants (Filters applied) {0} variants (No filters applied)

Castor Wheels - Swivel Plate

In stock - Delivery conditions may apply, visit our FAQs In production

Castor Wheels - Swivel Plate are most commonly mounted into a socket on wooden or metal tubular legs. These casters push into place, allow 360-degree rotation, and secure into place with brakes.

{0} variants (Filters applied) {0} variants (No filters applied)

Double Sided Foam Tape Pieces - Permanent - Thick Twin Stick

In stock - Delivery conditions may apply, visit our FAQs In production

Thick Twin Stick foam blocks with permanent adhesive on both sides can be used to create a lasting 3-D effect. Our extremely aggressive rubber based adhesive was designed to bond many different types of surfaces including corrugate, chipboard, wood, low surface energy plastics, powder coated materials, UV coatings. Specifications: Adhesive: Rubber-based permanent on both sides (not recommended for direct UV exposure) Application Temperature: 65F to 100F; Service Temperature: -20F to 150F; Applications. Lightweight Applications or filling gaps. Adds 3-D effects. Helps displays strong. Pop Out

{0} variants (Filters applied) {0} variants (No filters applied)

Double Sided Foam Tape Pieces - Permanent - Twin Stick

In stock - Delivery conditions may apply, visit our FAQs In production

Twin Stick is the industry favorite for assembling POP displays and signage. The flexible foam carrier fills gaps, allowing irregular surfaces to be joined. Our extremely aggressive rubber based adhesive was designed to bond many different types of surfaces including corrugate, chipboard, wood, low surface energy plastics, powder coated materials, UV coatings.

{0} variants (Filters applied) {0} variants (No filters applied)

Double Sided Foam Tape Pieces - Removable 1-Side - Remo One

In stock - Delivery conditions may apply, visit our FAQs In production

Remo One is double sided Perm / Peel adhesive foam tape with our extremely aggressive permanent adhesive on one side and our removable adhesive on the other side. The removable side is identified with our red printed liner and removes cleanly from most hard, non-delaminating surfaces even after extended periods of time. Specifications: Adhesive: Permanent rubber based on one side, removable adhesive on mounting side; Application Temperature: 65F to 100F; Service Temperature: -20F to 150F Holding Power: 1/2 lb per 1 sq. in. of tape. Intended for one time use; Applications: Promotional and temporary signage. Temporary and permanent displays, Single use promotional graphics. Violators and wobblers.

{0} variants (Filters applied) {0} variants (No filters applied)

Double Sided Foam Tape Pieces - Removable 1-Side - Thick Remo One

In stock - Delivery conditions may apply, visit our FAQs In production

Thick Remo One is a double sided Perm / Peel adhesive foam block used to create a 3-D effect. It has our extremely aggressive permanent adhesive on one side and our removable adhesive on the other side. The removable side is identified with our red printed liner and removes cleanly from most hard, non-delaminating surfaces even after extended periods of time. Specifications: Adhesive: Permanent rubber based on one side, removable adhesive on mounting sidestrong. Application Temperature: 65F to 100F. Service Temperature: -20F to 150F For lightweight applications or filling gaps. Intended for one-time use. Applications. Promotional signage Temporary signage. Temporary and semi-permanent displays. Single use graphics. Violators and wobblers.

{0} variants (Filters applied) {0} variants (No filters applied)

Double Sided Foam Tape Pieces - Removable 2-Side- Remo Two

In stock - Delivery conditions may apply, visit our FAQs In production

Remo Two is double sided adhesive foam tape that is removable on both sides. Specifications: Adhesive: Removable adhesive on both sides (not recommended in applications with direct UV exposure); Application Temperature: 65F to 100F; Service Temperature: -20F to 150F; Holding Power: 1/2 lb per 1 sq. in. of tape. Intended for one time use; Applications: Promotional and temporary signage Consumer Packaging. Single use promotional graphics. Kits unattached to graphics

{0} variants (Filters applied) {0} variants (No filters applied)

Double Sided Foam Tape Pieces - Removable 2-Side-Thick Remo Two

In stock - Delivery conditions may apply, visit our FAQs In production

Thick Remo Two is a double sided adhesive foam block used to create a 3-D effect. It has our removable adhesive on both sides. Our removable adhesive removes cleanly from most hard, non-delaminating surfaces even after extended periods of time. Specifications: Adhesive: Removable adhesive on both sides (not recommended in applications with direct UV exposure) Application Temperature: 65F to 100F Service Temperature: -20F to 150F Holding Power: 1/2 lb per 1 sq. in. of tape. Applications. Promotional and temporary signage. Temporary and permanent displays. Single use promotional graphics. Violators and wobblers

{0} variants (Filters applied) {0} variants (No filters applied)

Double Sided Foam Tape Rolls - Permanent - Dubl Kote Acrylic

In stock - Delivery conditions may apply, visit our FAQs In production

Dubl Kote Acrylic is versatile double sided foam tape coated with acrylic adhesive on both sides. It is ideal for hand or automated application. Flexible for filling spaces and conformable for joining irregular surfaces. Acrylic adhesives are UV Stable and have good plasticizer resistance. . Specifications: Application Temperature: 65F to 100F Service Temperature: -20F to 175F Applications. Signage, Outdoor signage, End caps, Headers, Air fresheners, Protective trim, light weight Mirror mounting.

{0} variants (Filters applied) {0} variants (No filters applied)

Double Sided Foam Tape Rolls - Permanent - Dubl Kote Rubber

In stock - Delivery conditions may apply, visit our FAQs In production

Dubl Kote is a versatile double sided foam tape coated with rubber adhesive on both sides. It is ideal for hand or automatic applications. Flexible for filling spaces and conformable for joining irregular surfaces. Designed to bond to many different types of surfaces including corrugate, wood, powder coated materials, glass, and low surface energy plastics. Specifications: Adhesive: Rubber based permanent on both sides (not recommended for direct UV exposure) Application Temperature: 65F to 150F Service Temperature: -20F to 150F Holding Power: 1 lb per 1 sq. in. of tape. Applications. Temporary, semi-permanent, and permanent displays, Plastic extrusions, Wire management raceways, Signage, End Caps, Headers, Textured surface bonding.

{0} variants (Filters applied) {0} variants (No filters applied)

Double Sided Foam Tape Rolls - Removable One Side - Metal Shelf Tape

In stock - Delivery conditions may apply, visit our FAQs In production

Duraco Metal Shelf Tape has been field tested to meet merchandising needs for a strong double adhesive foam tape that can be removed from hard non-delaminating surfaces without leaving behind unsightly foam tape residue. Specifications: Adhesive: Rubber-based on both sides (not recommended for direct UV exposure.) The adhesive on the Shelf Side is specially formulated to be removed without foam tear when adhered to a metal surface. Application Temperature: 65F to 100F Service Temperature: -20F to 150F Applications. Price Channel Attachment, Metal Shelving, Warehouse/Storage: Location Labeling, Merchandising Racks, Metal Shelf Signage

{0} variants (Filters applied) {0} variants (No filters applied)

Double Sided Foam Tape Rolls - Removable one Side - Remo One

In stock - Delivery conditions may apply, visit our FAQs In production

Remo One is double sided adhesive foam tape with our extremely aggressive permanent adhesive on one side and our removable adhesive on the other side. The removable side is identified with our red printed liner and removes cleanly from most hard, non-delaminating surfaces even after extended periods of time. Specifications: Adhesive: Permanent rubber based on one side, removable adhesive on mounting side. Application Temperature: 65F to 100F Service Temperature: -20F to 150F Holding Power: 1/2 lb per 1 sq. in. of tape. Intended for one time use. Applications. Promotional and temporary signage, temporary and permanent displays, Single use promotional graphics, Violators and wobblers, Short Rolls are great to include in kits with all kinds of promotional or temporary signage.

{0} variants (Filters applied) {0} variants (No filters applied)

Double Sided Suction Cups

In stock - Delivery conditions may apply, visit our FAQs In production

Double Sided Suction Cups securely holds, separates, and cushions two parallel surfaces. The design joins clean, flat surfaces without requiring a mounting hole or other fastener.

{0} variants (Filters applied) {0} variants (No filters applied)

Edge Wire Saddles

In stock - Delivery conditions may apply, visit our FAQs In production

This range of edge wire saddles allows for wires to be fixed to the edge of a panel or in a panel cut-out and comes with locking or non-locking top.

{0} variants (Filters applied) {0} variants (No filters applied)

Film Tape Pieces - DK Film Rubber

In stock - Delivery conditions may apply, visit our FAQs In production

DK Film is a high tack filmic double sided tape with a rubber adhesive. Rubber based adhesives have good initial tack and are designed to bond to many different types of surfaces including low surface energy substrates. Specifications: Adhesive: Rubber based permanent on both sides (not recommended for direct UV exposure). Application Temperature: 65F to 100F. Service Temperature: -20F to 190F. Thickness: 0.5 mil film - 2 mil adhesive on each side. Applications: Nameplates, Packaging and bindery, Signage, POP displays, Corrugated folder/box, Plastic fasteners to name a few application.

{0} variants (Filters applied) {0} variants (No filters applied)

Film Tape Rolls - 4081 Perm / Peel Fingerlift Tape

In stock - Delivery conditions may apply, visit our FAQs In production

Duraco Film 4081 HI-LO Acrylic is a double sided tape with a permanent adhesive on the exposed side and a removable adhesive on the liner side. The finger lift liner has a dry edge on both sides, making removal fast and easy. The acrylic adhesive provides excellent UV and high temperature resistance.

{0} variants (Filters applied) {0} variants (No filters applied)

Film Tape Rolls - 4181 Perm / Peel Fingerlift Tape

In stock - Delivery conditions may apply, visit our FAQs In production

4181 is a double sided Perm / Peel tape with a fingerlift liner, it is coated with permanent synthetic rubber on the open side and a peelable acrylic adhesive on the closed side. Specifications: Classifications: FDA Regulation 175.105 for indirect food contact. Core Diameter: 76.0 mm. Applications: Protection / scratch pads, Poster mounting, Core splicing, Resealable envelopes, Resealable packaging.

{0} variants (Filters applied) {0} variants (No filters applied)

Film Tape Rolls - 4503 Peelable Bag Sealing Tape - Fingerlift

In stock - Delivery conditions may apply, visit our FAQs In production

4503 is a Peelable bag sealing tape with a filmic liner. This product has a peelable acrylic adhesive on one side and an acrylic permanent adhesive on the open side. The release liner is a heat cuttable film, with a fingerlift on both sides for fast and easy liner removal.

{0} variants (Filters applied) {0} variants (No filters applied)
  • of 3