Steel Cam Locks

Mini Quarter Turn Latches with 45 degree Housing are specially designed with an internal spring which provides 1mm of torsion. The cam sits at a 45 degree angle to the housing. Both Chrome and Black Coated latches are available with different head style and grip range options

Actuator plates are for use with our standard range of cams. When applied with our swinghandles and accompanying rods, users can benefit from a multi locking system.

Adjustable T Handle w/ Compression are used for cabinets that require better sealing under vibration conditions. They are available in locking and non-locking versions.

Lift and Turn Cam Latches consist of a low profile handle which stows away when not in use. They offer a 90 degree rotation and are simple to install using either a bracket or a snap in fixing. The swing handles also consist of a slam action spring loaded handle and can be used either indoors or outdoors. They are ideal for cabinets, enclosures and machinery covers. They come with a choice of keyed alike, key to differ or a button to press.

Cylinder Locking Quarter Turn Latches include a range of products including Push Button Latches, Clip On Quarter Turn Latches and Cylinder Cam Locks Push Button Latches have a push button opening and slam lock closing action. They are single hole installation and suit panels with a thickness of up to 16mm. The are complete with handle pull and catch place and are supplied with 2 keys (CH751) Clip On Quarter Turn Latches include a body and a clip. They involve tool-less assembly for quick and easy mounting and have up to a 90 degree rotation angle. The latch can be mounted onto doors with thicknesses of up to 6mm and are ideal for lightweight door applications. Cylinder Cam Locks offer keyed alike, keyed to differ and master key options. The master key versions are keyed different with a master key that will open all locks. The master keys must be ordered separately. Each key is supplied with 2 locks

Cam Locks with Wing Knobs are supplied with a rubber gasket for a good seal. There are 3 different types available offering different material and grip range options

The Adjustable Compression T Handle Lock is used for cabinets requiring better sealing under vibration condition. The latch provides a 6 mm of compression to increase noise isolation. 3 alternative cams are available to enable a cam forward and cam reverse action. A wide range of grip range is achievable with the adjustable screw. 2 different cut out are available for this range.

This Compression T Handle Lock is used for cabinets requiring better sealing under vibration condition. The latch provides 6 mm of compression to increase noise isolation. Standard cams without stoppers are required and 2 different cut out are available for this range.

The Compression Lock with Wing Knob is used for cabinets requiring better sealing under vibrating condition. The latch provides a 6 mm of compression to increase noise isolation. Standard cams without stoppers are required and 2 different cut out are available for this range.

Cylinder Locking Cam Latches have a chrome plated die-cast zinc alloy body with a steel cam. The range fits different cut outs and offer a choice of key alike, key to deffer.Various rotation angles are available depending on the selection.

Fixed Compression Latches are IP65 rated and are made from a Black Powder Coated Die-Cast Zinc. They offer a 6mm compression. When the key is turned 90 degrees the cam turns to the locking position. When the key is turned 180 degrees the cam moves to the fixing position. The latch provides both good compression and good noise isolation with different head style and grip range options available

Flush Trigger Handle Latches are available in either a 0-24mm or 24-26mm adjustable grip range. They can come as either keyed alike (5333), keyed different or with no lock and they are supplied with 2 keys per lock. They are suitable for a panel thickness of less than, and including, 2mm and consist of an aesthetically pleasing flush trigger design

Handle Turn Cam Latches - Adjustable are used in applications such as electric panels and machinery covers. The range comes with a black or chrome finish. They are available with 2 key alike or 2 key differ.

Handle Turn Cam Latches - L Handle are used in applications such as electric panels and machinery covers. The range comes with a black or chrome finish. They are available with 2 key alike or 2 key differ.

Mini Cam Locks with Wing Knobs are ideal for lighter weight applications where space is at a premium. They are available in either Chrome Plated or Black Powder Coated Die-Cast Zinc and in an array of grip ranges

Handle Turn Cam Latches - T Handle are used in applications such as electric panels and machinery covers. The range comes with a black or chrome finish. They are available with 2 key alike or 2 key differ.

HVAC Lock is an outside locking system providing safety for pressurised doors. This left and right hand lock can be selected with a T handle or L handle.

Lift and Turn Compression Lock is ideal for cabinets that require better sealing under vibration condition. The locks provides 5 mm of compression to increase noise isolation. The Cut out for this range is 16.5x13.7 mm.

Mini Adjustable Compression Latches are IP65 rated and are made from Black Die-Cast Zinc. They offer a 4mm compression and are supplied with a sealing gasket. They allow for a simple adjustment of the grip range and are ideal for applications with a limited space. The keys that are compatible are sold separately

Mini Quarter Turn Locks come in an array of head styles, grip ranges, and types to suit a range of application needs. Type 1 operates with a spring action and is made from a strong die-cast zinc alloy

This range of Mini Camlocks are without spring action and key alike. The type fixed by a nut fit in a 16.2x14.2 cut out, the type fixed by a clip fit in 17.2 x14.2 cut out.

Raised Trigger Handle Latches are available in either a 0-24mm or 24-26mm adjustable grip range. They can come as either keyed alike (5333), keyed different or with no lock and they are supplied with 2 keys per lock. They are suitable for a panel thickness of less than, and including, 2mm and consist of an aesthetically pleasing raised trigger design

Cam Locks with Wing Knob are used in applications such as electric panels, machinery covers. They are fitted with a rubber gasket for additional sealing. The range comes with a choice of finishes and grip range. They are supplied with standard Euro keys.

Featured with Padlock Fittings for additional security option when sealed with a padlock. They are also fitted with a rubber gasket for additional sealing properties. On offer are right and left hand door orientations and an array of grip ranges

The popular Quarter Turn Latches is used for cabinets and enclosures requiring vibration control. The housing is equipped with an internal spring to provide 1.5 mm of compression. An o-ring provides a seal between the spring and the driver. This IP65 range, offers an extensive combination of materials and finishes along with grip range selection to suit many applications. The cams will not rotate beyond quarter turn due to the stop lip.