Cable Clamps - SHR Clips
SHR clips are designed to hold the size 20 and 25 Essentra Slit Harness Wrap (SHR Series). 4 different mounting types; snap-lock into either a round or square hole (to prevent rotation), screw mount and adhesive mount. Internal rib that grips the wrap. Releasable latch that allows for maintenance. Black, UL94 V-2 Nylon 6/6.
Cable Clamps - Screw/Adhesive Mount Strap & Buckle
Universal Mounting Strap are a very versatile cable management system which not only bound cable tightly but also can be mounted either by self-adhesive or by a screw or rivet
Fiber Guides - Corner
The Fiber Management range supports many low profile fiber reels for spooling excess fiber onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The range also offers stacking pillars and stand-offs which can be used to stack multiple reels for compact spooling of multiple runs of fiber. Fiber Guides are used to assist with reeling and corner guides maintain a bending radius through a 90 degree turn
Fiber Clips - 16-Slot - 3.9mm, 3.4mm, 2.9mm
16-Slot Fiber Clips are designed to hold six 3.4mm, 3.9mm or 2.9mm diameter fibers. They can form a part of the larger EFA04 18 fiber clip which can be broken down to form individual clips which provides plenty of versatility
Fiber Reel Accessories - Stacking Pillar
This pillar allows for stacking multiple EFA04 fiber reels. Once the desired number of reels are stacked, they are restrained with a spring clip that is included. Pillar is mounted with an included rivet from the bottom of the board.
Flat Cable Clamp - Screw & Adhesive Mount, Split Arm
For flat or ribbon cables Flat Cable Clamps are ideal and the adhesive mount aluminum clamps offer a secure fastening with a simple installation thanks to the adhesive base and there is also screw mount options available. The split arm feature ensured even easier cable and mounting access
Fiber Clips - 6-Slot - 3.4mm, 2.9mm
6-Slot Fiber Clips are designed to hold six 3.4mm or 2.9mm diameter fibers. They can form a part of the larger EFA04 18 fiber clip which can be broken down to form individual clips which provides plenty of versatility
Cable Clamps - Adhesive/Screw Mount, Round Wire Saddle
Cables slide into wire saddle and are kept in place without the need of a locking mechanism. Round wire saddle means a wide range of cable diameters are suitable. Available in both a screw mount and adhesive mount version.
Cable Clamps - Adhesive Mount, J-Style
These cable clamps are available in two mounting methods; fir-tree mount and arrowhead mount. They are also available with various spacer lengths to hold the cables off of the board. They have a cupped base that adds stability as well as covering the hole completely. The cables are inserted through the side of the clamp for where space is an issue.
Flat Cable Clamp - Screw & Adhesive Mount, with Tension
Flat Cable Clamps are simple to use and install. They have an adhesive base to aid the ease of installation and there is an alternative screw mount option. These clamps have additional tension which provides a strong clamp on a flat cable
Fiber Clips - 4-Slot - 3.9mm
4-Slot Fiber Clips are designed to hold four 3.9mm diameter fibers. They can form a part of the larger EFA04 18 fiber clip which can be broken down to form individual clips which provides plenty of versatility