Hydraulic Application Caps & Plugs

We found 8 product types for Metric Threads Hydraulic Application Caps & Plugs

Need a Quote?

For large volumes and customized products, add to your cart and click request a quote, or email sales@essentracomponents.com and we will respond within 2 working days.

Filter Products

List Grid

Flanged Caps

In stock In production

Flanged Caps are designed to protect the thread of studs. They are used throughout the automotive and engineering industries for general protection. The flanges on the profiles have different sizes allowing socket wrench to function without removing the protection.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded O-ring Plugs - Metric Threads

In stock In production

Threaded O-ring Plugs - Metric Threads can be applied or removed by hand, hex wrench or screwdriver. The O-ring provides a water tight seal for superior leakage protection.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Protection Caps - Metric Threads

In stock In production

Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. The range is suitable for Metric threads.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Sealing Caps - Metric Threads

In stock In production

Metric Threaded Sealing Caps are fitted with an internal neoprene rubber sealing disk to limit contamination from deposit and entry of particules. They are suitable to protect metric threads. While hand tightening is recommended, the cap can be applied or removed by wrench or socket at a low torque.

{0} variants (Filters applied) {0} variants (No filters applied)

Tear-Tab Caps

In stock In production

Tear-Tab Caps are easy and rapid solution to remove the cap from the part. By pulling the tab, the cap split wide open offering an easy solution to numerous applications. The range is suitable to UNF and NPT threads.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Protection Plugs - Metric Threads

In stock In production

Threaded Protection Plugs - Metric Threads are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and they offer an excellent protection from dirt, moisture and corrosion. They are suitable for Metric threads.

{0} variants (Filters applied) {0} variants (No filters applied)

Snap-Fit Plugs

In stock In production

Snap-Fit Plugs have a single turn providing tight fit once pushed into position. The plug is design with a center tab to allow a strong grip for tightening and easy removal. The range is suitable for Metric, BSP and UNF threads.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Protection Plugs - Quick Fit

In stock In production

Threaded Protection Plugs - Quick Fit are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and the short thread allows a quick fit on the part. Suitable for Metric, BSP and UNF thread sizes.

{0} variants (Filters applied) {0} variants (No filters applied)