(23 product groups)
Adjustable Clips are push mounting into a panel and then the adjustable clip is versatile to accept an array of cable sizes.
These cable clamps offer the benefit of routing a 25.0 mm tube / pipe as well as two smaller 6.0 mm bundles separately. Available in two sizes for different hole diameters.
Low profile for use on densely packed boards or other limited space applications. Useful for routing two parallel wire bundles. Quickly snaps into a .125 in hole in a 1/16 in panel. UL recognized under #E71558. Available in three different sizes to hold bundles of 1/8 in, 3/16 in and 1/4 in. UL94 V-2 Nylon 6/6, Natural color
Securely holds corrugated/convoluted tubing or other bundles. An internal rib spanning the diameter of the clamp provides a tight grip. Releasable latch for convenient maintenance. Fir-tree mount accommodates a large range of panel thicknesses
This Cable Clamp has a fir tree mount and is easily pushed into a mounting hole using a standard 6mm hexagonal socket driven onto the mounting head. The clamp is releasable and reusable for easy troubleshooting.
Low profile for use on densely packed boards or other limited space applciations. Good for mounting bundles in corners or along edges. Quickly snaps into a 1/4 hole in a 1/16 " panel. Available in three different sizes to hold bundles of 1/8 ", 3/16 " and 1/4 ". UL94 V-2 Nylon 6/6, Natural colour."
Low profile cable clamps for use on densely packed boards or other limited space applications. Good for mounting bundles in corners or along edges.
One-piece design that is self-mounting. They are quickly installed by hand. Many sizes are available for various bundle diameters and colors/materials
Ratcheting clip grips the bundle securely. Adjustable for a wide range of bundle diameters. While locking the bundle in, it will reopen for routing changes. Good for high vibration applications. Once the clip is closed it will not open until the tab is released. Available in either UL94 V-2 or UL94 V-0 material
Can be opened and closed multiple times for adding or removing cables. Large contoured base that assures stable mounting. Nylon 6/6
Cables slide into wire saddle and are kept in place without the need of a locking mechanism. Round wire saddle means a wide range of cable diameters are suitable. Plug-in application adds to the ease of installation. Flat side can be beneficial when space is limited. Cupped base provides stability and protects the hole from contaminants. Several spacer options to isolate the cables away from board components
This range of corrugated tube clips is designed to work with size 20 and 25 of Essentra Slit Harness Wrap (SHR Series), comes in four different mounting types; snap lock into either a round or square hole (to prevent rotation), screw mount and adhesive mount. Internal rib that grips the wrap. Releasable latch that allows for maintenance.
Screw Mount cable straps are a very versatile cable management system which not only bound cable tightly but also can be mounted either by self-adhesive or by a screw or rivet.
Webbing Centre Clips are either snap lock or self-adhesive mounted and the two sides of the clip combine to clamp the cable in place. Available in both black and natural
These Cable holders are available in two mounting methods; fir-tree mount and arrowhead mount. They are also available with various spacer lengths to hold the cables off of the board. They have a cupped base that adds stability as well as covering the hole completely. The cables are inserted through the side of the clamp in applications where space is an issue.
Snap in, Hinged, No Tension Flat Cable Clamps are easy to install due to their push in application feature. The hinge and no tensions aspects ensure the cables will sit tidily without being strained by the clamp
For flat or ribbon cables Flat Cable Clamps are ideal and the snap in feature offers a quick fastening with a simple installation. These clamps are also quick to remove thanks to the hinge and have additional tension which provides a strong clamp on a flat cable
Flat Cable Clamps are simple to use and install and are ideal for ribbon cables. These Snap-in low profile clips are ideal for a quick installation application
Snap, in, Top Lock, Mini Flat Cable Clamps are easy to install due to their push in application feature. These are ideal for more light weight cables and are top locking
Snap, in, Top Lock Flat Cable Clamps are easy to install due to their push in application feature. These cable clamps are top locking
Various spacer options allow the cables to be isolated from board components. Bundle is inserted into the top of the clip where they are retained
This lock clip standoff (style 1) provides a secure yet simple fastening and are an ideal cable management solution for a variety of applications. The plug-in application adds to the ease of installation and the locking clip adds a level of security
This lock clip standoff (style 2) provides a secure yet simple fastening and are an ideal cable management solution for a variety of applications. The plug-in application adds to the ease of installation and the locking clip adds a level of security