(34 product groups)
Bundles are securely sored in these nylon clamps. Many bundle diameters. Black and Natural colors. UL94 V-2 and UL94 V-0 rated material. Different mounting holes for different screw sizes
Screw Mount cable straps are a very versatile cable management system which not only bound cable tightly but also can be mounted either by self-adhesive or by a screw or rivet.
Cables slide into wire saddle and are kept in place without the need of a locking mechanism. Round wire saddle means a wide range of cable diameters are suitable. Plug-in application adds to the ease of installation. Flat side can be beneficial when space is limited. Cupped base provides stability and protects the hole from contaminants. Several spacer options to isolate the cables away from board components
Single Wire Cable Clamps provide a secure and simple fastening that is an ideal cable management solution for a variety of applications. The adhesive mount is a very secure and is also a removable application.
Strain Relief Clamps mount in a chassis to secure the main power cable in appliances. The clamp provides strain relief to the cable and protects the cable from the metal cut-out whilst the screw mounting provides a secure fastening
Adjustable Clips are push mounting into a panel and then the adjustable clip is versatile to accept an array of cable sizes.
Webbing Centre Clips are either snap lock or self-adhesive mounted and the two sides of the clip combine to clamp the cable in place. Available in both black and natural
One-piece design that is self-mounting. They are quickly installed by hand. Many sizes are available for various bundle diameters and colors/materials
This cable clamp securely holds corrugated and convoluted tubing or other bundles in place. It has an internal rib spanning the diameter of the clamp providing a tight grip.
These cable clamps offer the benefit of routing a 25.0 mm tube / pipe as well as two smaller 6.0 mm bundles separately. Available in two sizes for different hole diameters.
These cable clamps have a hinged locking top. The cable(s) are placed in the center of the clamp first, then the hinged top is placed over the cables. The legs of the clamps are placed into two holes. The top is secured in place, holding the cable with the help of two screws. As the screws are engaged, the legs expand holding the clamp in place without the need of a nut. This means there is no need to access the bottom side of the board.
Low profile cable clamps for use on densely packed boards or other limited space applications. Good for mounting bundles in corners or along edges.
Adhesive Mount Adjustable Cable Clamps have a ratcheting feature to hold and lock bundles securely. These clamps can be reopened for routing changes. Easily installed with the adhesive base.
Low profile for use on densely packed boards or other limited space applications. Useful for routing two parallel wire bundles.125 in Hole in center for a #4 or M3 screw. Available in three different sizes to hold bundles of 1/8 in, 3/16 in and 1/4 in. UL94 V-2 Nylon 6/6, Natural color
Securely holds corrugated/convoluted tubing or other bundles. An internal rib spanning the diameter of the clamp provides a tight grip. Releasable latch for convenient maintenance. Fir-tree mount accommodates a large range of panel thicknesses
Low profile for use on densely packed boards or other limited space applications. Useful for routing two parallel wire bundles. Quickly snaps into a .125 in hole in a 1/16 in panel. UL recognized under #E71558. Available in three different sizes to hold bundles of 1/8 in, 3/16 in and 1/4 in. UL94 V-2 Nylon 6/6, Natural color
This Cable Clamp has a fir tree mount and is easily pushed into a mounting hole using a standard 6mm hexagonal socket driven onto the mounting head. The clamp is releasable and reusable for easy troubleshooting.
These Cable holders are available in two mounting methods; fir-tree mount and arrowhead mount. They are also available with various spacer lengths to hold the cables off of the board. They have a cupped base that adds stability as well as covering the hole completely. The cables are inserted through the side of the clamp in applications where space is an issue.
Can be opened and closed multiple times for adding or removing cables. Large contoured base that assures stable mounting. Nylon 6/6
Low profile for use on densely packed boards or other limited space applications. Good for mounting bundles in corners or along edges. Mount with a #4 or M3 screw and provide exceptional retention strength. Available in three sizes for bundle diameters 1/8 in, 3/16 in or 1/4 in
Bundles are securely sored in these nylon clamps. Many bundle diameters. Black and Natural colours. UL94 V-2 and UL94 V-0 rated material. Different mounting holes for different screw sizes
Ratcheting clip grips the bundle securely. Adjustable for a wide range of bundle diameters. While locking the bundle in, it will reopen for routing changes. Good for high vibration applications. Once the clip is closed it will not open until the tab is released. Available in either UL94 V-2 or UL94 V-0 material
Easily mounted with adhesive. No through hole is required. Locking device holds cable in place and can be re-opened as well. Different styles, colours and material available.
This range of corrugated tube clips is designed to work with size 20 and 25 of Essentra Slit Harness Wrap (SHR Series), comes in four different mounting types; snap lock into either a round or square hole (to prevent rotation), screw mount and adhesive mount. Internal rib that grips the wrap. Releasable latch that allows for maintenance.
Low profile for use on densely packed boards or other limited space applciations. Good for mounting bundles in corners or along edges. Quickly snaps into a 1/4 hole in a 1/16 " panel. Available in three different sizes to hold bundles of 1/8 ", 3/16 " and 1/4 ". UL94 V-2 Nylon 6/6, Natural colour."