Push-In Rivets - Removable
Easily snapped in by hand. Removable by png on the side taps of the pin. Allow blind side fixing. Pin and Grommet are provided separately. Can be used in a round or square hole. Square hole prevents rotation
Push-In Rivets - Drive Fasteners
These drive fasteners are a multi-purpose, front loaded fastener. They have a hollow body which increases their flexibility for ease of insertion and removal. Can be used as a decorative hole plug. Easily inserted by hand. Available in both UL94 V-2 and UL94 V-0 rated materials
Push-In Rivets - Mounting Button
These rivets are an easy and economical solution to mating objects together. The mounting arrowhead locks it securely in place. They can be removed from the underside of the board
Push-In Rivets - Snap
Our most popular and easiest to install plastic rivets! Simply push the head in and the grommet expands to hold it in place. Removable by png head. Available in both black and white colours. UL94 V-2 or UL94 V-0 material and also in Heat Stabilized material.
Push-In Rivets - Knob Head
Flat, push/pull knob head lets river snap in and out of hole up to 25 times. For applications that require quick assembly and disassembly. Easily pushed in by hand. As the pin is inserted into the grommet, the legs expand, locking it in place
Push-In Rivets - Folding Leg
Pushing the pin into the rivet body causes the legs to expand and grip the material. The legs fold out to .73 mm wide. Once installed, the rivet cannot be removed from the outside of the box. Good for use with cardboard or other porous material. Available in black and natural.
Push-In Rivets - Clinch
These expansion rivets can be set blind without the need for access to the back of the panel. Set by png the mandrel head into the rivet body, expanding the rivet body and causing it to flare against the reverse side. When sufficient force is applied, the mandrel will snap at its break point. Installed with a pop rivet installation tool (not currently offered by Essentra). Provides an extremely strong hold. Particularly good for soft materials.
Push-In Rivets - Key Hole Clip
These fasteners have a unique key-hole shaped interior which increases flexibility for easy assembly by hand. Angled panel lock section that takes up slack in panels to provide a tight fit. Available for a variety of hole diameters and panel thicknesses
Push-In Rivets - Plastic, Push, Round/Square Hole
Pre-Installed pin for easy finger pressure installation. Can be mounted in a Round or Square hole. Use square hole mounting for anti-rotaion applications. UL94 V-2 rated Nylon
Push-in Rivets - Barbed
These fir tree or barbed rivets have a ribbed design that ensures a fast and easy installation while securely holding into various materials such as wood, metal, foam, rubber and plastic. When pushed into a hole, the flexible ribs deflect then spring back to lock securely in place. Available in over 100 sizes and styles for different hole diameters and panel thicknesses.
Push-In Rivets - Arrow Clip
Push-in rivets typically require no tools for installation; they fit easily with a push. Fasten thin gauge material or lightweight components. Buttonhead ios suitable for the front of panels. Natural and Black colours available.
Snap-Together Rivets - Male/Female Ratchet
The male clip is ratcheted into the female washer to hold surfaces together. Ideal for fixing corrugated panels. Fast installation. One pack contains 1,000 each of the clips and washers. Colours: Black, White and High Clarity. Washers - LDPE, Clips - PP
Push-In Rivets - Heat Sink
Fasten a heat sink to a processor chip on a PCB. They have an integrated spring that provides continuous pressure to the heat sink until the thermal adhesive cures. The HSR-2 has a cross molded in allowing it to be installed by using a phillips head screwdriver