Adjustable Clips are push mounting into a panel and then the adjustable clip is versatile to accept an array of cable sizes.
Available in 2 types. Strap cables to a panel using a push fit fixing that attaches to a 3mm panel. Type 1 has a anti-rotation fixing to hold the strap in place and prevent movement.
These cable clamps offer the benefit of routing a 25.0 mm tube / pipe as well as two smaller 6.0 mm bundles separately. Available in two sizes for different hole diameters.
Low profile for use on densely packed boards or other limited space applications. Useful for routing two parallel wire bundles. Quickly snaps into a .125 in hole in a 1/16 in panel. UL recognized under #E71558. Available in three different sizes to hold bundles of 1/8 in, 3/16 in and 1/4 in. UL94 V-2 Nylon 6/6, Natural color
Securely holds corrugated/convoluted tubing or other bundles. An internal rib spanning the diameter of the clamp provides a tight grip. Releasable latch for convenient maintenance. Fir-tree mount accommodates a large range of panel thicknesses
This Cable Clamp has a fir tree mount and is easily pushed into a mounting hole using a standard 6mm hexagonal socket driven onto the mounting head. The clamp is releasable and reusable for easy troubleshooting.
Low profile for use on densely packed boards or other limited space applciations. Good for mounting bundles in corners or along edges. Quickly snaps into a 1/4 hole in a 1/16 " panel. Available in three different sizes to hold bundles of 1/8 ", 3/16 " and 1/4 ". UL94 V-2 Nylon 6/6, Natural colour."
Low profile cable clamps for use on densely packed boards or other limited space applications. Good for mounting bundles in corners or along edges.
One-piece design that is self-mounting. They are quickly installed by hand. Many sizes are available for various bundle diameters and colors/materials
Ratcheting clip grips the bundle securely. Adjustable for a wide range of bundle diameters. While locking the bundle in, it will reopen for routing changes. Good for high vibration applications. Once the clip is closed it will not open until the tab is released. Available in either UL94 V-2 or UL94 V-0 material
Can be opened and closed multiple times for adding or removing cables. Large contoured base that assures stable mounting. Nylon 6/6
Cables slide into wire saddle and are kept in place without the need of a locking mechanism. The snap-in application adds to the ease of installation. The round wire saddle means a wide range of cable diameters are suitable. Available in both UL94 V-2 and UL94 V-0 materials. Available in Natural and Black colours.
Cables slide into wire saddle and are kept in place without the need of a locking mechanism. Round wire saddle means a wide range of cable diameters are suitable. Plug-in application adds to the ease of installation. Flat side can be beneficial when space is limited. Cupped base provides stability and protects the hole from contaminants. Several spacer options to isolate the cables away from board components
This range of corrugated tube clips is designed to work with size 20 and 25 of Essentra Slit Harness Wrap (SHR Series), comes in four different mounting types; snap lock into either a round or square hole (to prevent rotation), screw mount and adhesive mount. Internal rib that grips the wrap. Releasable latch that allows for maintenance.
Screw Mount cable straps are a very versatile cable management system which not only bound cable tightly but also can be mounted either by self-adhesive or by a screw or rivet.
Webbing Centre Clips are either snap lock or self-adhesive mounted and the two sides of the clip combine to clamp the cable in place. Available in both black and natural
These Cable holders are available in two mounting methods; fir-tree mount and arrowhead mount. They are also available with various spacer lengths to hold the cables off of the board. They have a cupped base that adds stability as well as covering the hole completely. The cables are inserted through the side of the clamp in applications where space is an issue.
Fibre Bend Limiting Tubing Clips are snap fitting for easy installation and allow the running of Fibre Bend Limiting Tubing along a panel, enclosure or racking unit. They are hinge fitted which also aids the ease of installation and removal
The optical Fibre spool is made of two extruded clips that snap into each other to form a clip with a smooth, curved surface to accommodate fibre optic bundles.
Fibre Clips are designed to hold various fibres or other components such as couplers, splice protectors or WDM's
6 Slot Fibre Clips are designed to hold six 3.4mm or 2.9mm diameter fibres. They can form a part of the larger EFA04 18 fibre clip which can be broken down to form individual clips which provides plenty of versatility
Fibre Cut-out Adapters convert a hole cut-out for an SC connector into a hole cut-out for an ST connector. The Optical Fibre Duplexer enables cable with aramid strands to be broken out and mechanically terminated.
The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn.
Snap in, Hinged, No Tension Flat Cable Clamps are easy to install due to their push in application feature. The hinge and no tensions aspects ensure the cables will sit tidily without being strained by the clamp
Snap, in, Top Lock, Mini Flat Cable Clamps are easy to install due to their push in application feature. These are ideal for more light weight cables and are top locking