Push-in rivets typically require no tools for installation; they fit easily with a push. Fasten thin gauge material or lightweight components. Buttonhead ios suitable for the front of panels. Natural and Black colours available.
These expansion rivets can be set blind without the need for access to the back of the panel. Set by png the mandrel head into the rivet body, expanding the rivet body and causing it to flare against the reverse side. When sufficient force is applied, the mandrel will snap at its break point. Installed with a pop rivet installation tool (not currently offered by Essentra). Provides an extremely strong hold. Particularly good for soft materials.
Countersunk design for flush surface. Tamper resistant design. Accomodates countersunk hole specification DIN ISO 7721. Available in black or white. Easily installed by hand
Drive Fasteners feature a hollow body that increases flexibility during the insertion and removal process - making them easy to install and remove. The grommet expands as the pin is inserted, providing a snug fit.
Our range includes options that are made from natural Acetal, RMS-14A with a UL94 HB flame resistances rating. We also stock a Polyoxymethylene (POM) snap rivets that's available in black and natural. Also included are a range of nylon drive fasteners made from Nylon 6/6, with flammability rating of UL94 V0. Colour options include black and natural.
Drive Fasteners are a multi-purpose rivet, ideal for applications in need of a front-mounted rivet. These rivets mean that connecting, mounting and fastening is feasible without the need for tools. They can be used as an effective, decorative hole plug.
Pushing the pin into the rivet body causes the legs to expand and grip the material. The legs fold out to .73 mm wide. Once installed, the rivet cannot be removed from the outside of the box. Good for use with cardboard or other porous material. Available in black and natural.
Fasten a heat sink to a processor chip on a PCB. They have an integrated spring that provides continuous pressure to the heat sink until the thermal adhesive cures. The HSR-2 has a cross molded in allowing it to be installed by using a phillips head screwdriver
Load Spreading Rivets (LSR) are a type of push rivet that provides a fast, economical and permanent fastening soloution. LSR rivets are so named as they expand, providing a secure and tight fit. These plastic rivets provide solid connections by means of blind side fixing.
Our range features a range of Push Rivets and Keyhole Clips, which have an easy finger-pressure design. Materials include; Nylon 6/6 and Polyethylene (PE). These plastic push rivets have good electrical insulation, and are also resistant to vibration, abrasion and corrosion.
Sold separately is a Rivet Hand Tool, offering faster fixing and is the recommended application method.
These rivets are an easy and economical solution to mating objects together. The mounting arrowhead locks it securely in place. They can be removed from the underside of the board
Pre-Installed pin for easy finger pressure installation. Can be mounted in a Round or Square hole. Use square hole mounting for anti-rotaion applications. UL94 V-2 rated Nylon
Push In Fasteners, or Push In Rivets are an easy to use and quick fastening solution that is ideal for neatly, and securely joining two parts together. These push fit rivets are made from natural Nylon 6/6.
Nylon is a strong, tough and durable material often used for connecting elements and other technical components. Our Nylon push fasteners provide an inexpensive, fast, and convenient method to join plastic, light sheet metal, insulating materials, circuit boards, or any other thin, lightweight material.
The nylon push rivets have specially designed legs that provide compression and expansion, helping to lock the fastener into pre-punched holes. They also have large heads for much easier assembly, and can be reused - making them an economical choice for your application.
Easily snapped in by hand. Removable by png on the side taps of the pin. Allow blind side fixing. Pin and Grommet are provided separately. Can be used in a round or square hole. Square hole prevents rotation
Snap Rivets are a quick and easy fastener solution that can be installed without the need for any tools! Fast and economical, they have specially designed legs that expand and firmly lock the component parts pemanently in place.
Browse our nylon fasteners available in Nylon 6, Nylon 6/66 and Nylon 4/6. Manufactured to UL94 V0 and UL94 V2. A nylon snap rivet in a locking style is also included, which has a Polycarbonate (PC) pin. A range of domed head nylon snap fasteners is also available.
Availanle in our extensive range are p-type snap rivets that are intended for high temperature applications. Made from black Polysulfide (PSU) and rated to UL94 HB - these plastic rivets can withstands temperatures of up to 155C.
Commonly used to fix connector's to printed circuit boards. Easily installed by hand. 4 different styles in a UL94 V-2 rated Nylon 6/6.
These rivets are a one-piece design with a pre-driven pin. Many styles avaiable for a variety of hole sizes and panel thicknesses. Removable by png out the pin
These fir tree or barbed rivets have a ribbed design that ensures a fast and easy installation while securely holding into various materials such as wood, metal, foam, rubber and plastic. When pushed into a hole, the flexible ribs deflect then spring back to lock securely in place. Available in over 100 sizes and styles for different hole diameters and panel thicknesses.
Quarter Turn Panel Fasteners, commonly known as quarter-turn studs or rivets, engage receptacles and are fastened by turning the stud about 90 degrees - a process known as a 'quarter-turn rotation'. The fastener provides a predictable holding force and offers a detent in locked position that resists opening in error. A solution that is quick, but secure in its assembly.
Included in our quarter-turn range are panel fasteners made from Acetal, RMS-14. This selection includes a black option that is UL94 HB rated. Using a flat-head screwdriver or coin, a quarter-turn releases the bottom panel while retaining the fastener in the removable panel. Alternatively the non-rated Acetal options in black or white are easily installed by driving the plunger into the grommet with a hammer that locks two panels together. Panels are easily separated using a screwdriver to rotate the plunger a quarter turn.
Also included are our cross head POM rivets. Suitable for security panels and components that need to be replaced in a hurry; they provide a permanent mounting solution suitable for a wide range of panel depths and mounting hole sizes. Or why not try our black Nylon quarter-turn latches. These are supplied in a pre-assembled format for added convenience. Ideal for when it is impossible to fit a receptacle in the frame work.
Rivet Hand Tools made from green ABS. The tool provides faster assembly and more accurate placement of Push Rivets. The large plunger head and easy grip handle reduce operater fatigue. To install; the rivet is loaded into the tool and inserted in the prepared hole. Pressure on the plunger frees the pin and expands the rivet in the assembly.
Barbed Rivets, or Ratchet Fasteners feature interlocking teeth that provide strong locking capability. The two-part rivets grip together, creating a flexible mounting range, that helps join two materials with ease - resulting in permanent fastening solution.
Our barbed snap rivets are made from a choice of clear Polycarbonate (PC), or Nylon 6/6 that has a flame resistance rating of UL94 V-2. Also included are two piece Assembly Clips that are also made from natural Nylon 6/6.
Mini Snap Rivets comprised of male and female parts. Made from natural nylon 6/6 that is UL94 V2, RMS-01. The perfect solution for fixing two panels together, with a simple snap.
Quickly install by simply pressing together. These rivets are an ideal choice for outdoor environments. They are resistant to corrosion, oil, abrasion and most chemicals.
Two part Push Clips featuring male and female pieces that form to hold flat panels together. The two rivets have teeth that grip to each other for quick and easy fastening that leaves a smooth appearance on both sides.
Made from Nylon 6/6; the fastener features low profiles on both sides of the assembly.
Snap fasteners with a PP male clip, which is ratcheted into the LDPE female washer to mate surfaces together - an ideal choice for corrugated panels.
Unscrewing Rivets are quick release fasteners, suitable for security panels and components that need to be replaced in a hurry. They can be easily installed, tighened, loosened, and removed using a cross head screwdriver.
Featureed in the range are Screw Rivets; made from Nylon 6/6 and available in black or natural; they have a cross drive for easy assembly or disassembly. They are ideal for use in electrical and electronic assemblies due to the good electrical insulation properties. Install the fastener by screwing the head down into the application. We also have Unscrewing Rivets that are made from black Nylon 6/6 that is UL94 V2 rated. As the pin is screwed into the body, the grommet expands - locking it in place. These rivets can be reused - making them an economical choice. Additionally, we offer black PA6 Screw Rivet Fasteners - ideal for larger hole diameters. These can be easily removed by unscrewing and installed by simply pushing into place. They offer high retention force.