These Masking Straight Tubing made from Natural Silicone are ideal to mask long profiles but also offer flexibility to customise length requirements.
These Masking Cones have a versatile dual role to serve more than one application purpose. They can be used as a cap to mask exposed studs or as a plug to mask exposed holes. The range is offered in various colours for rapid size identification. The colours available include; Natural, Black, Red, Yellow, Green, Blue, Brown and Purple. Our range also offers a variety of sizes to suit your application needs.
Easy Pull Masking Caps provide optimum protection for end tip profiles, such as rods, pipes and tubes during manufacturing processes. Typical applications include; powder coating, e-coating, plating, anodising and blasting.
The cap features an internal seal that provides a secure fit and the flanged design allows for easy removal of the can from the application. The caps can be reused multiple times.
To assure a proper fit due to design features, the inside diameter dimension should be approximately 10 percent smaller than the outside diameter of the part being masked.
Our range is available in two material options; Silicone and EPDM. Silicone is a premium masking material with high temperature and chemical resistance. They are suitable for a range of sizes due to the ribbed design. EPDM is a more economical material with reduce heat resistance.
These Ribbed Pipe End Caps are non-threaded and are available in either Red or Yellow, we offer a wide range of sizes to suit your application. They are ideal for protecting threaded or non-threaded pipes, tubes or rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement.
These Natural Low-Density Polyethylene Stud Protection Caps are used to protect BSP and UNF threads. The small flange allows easy fitting with socket wrench without having to remove the protection cap. This allow economical handling and additional protection against contaminants. You may also be interested in our range of Nut Protection Caps.
A Quick Release Cap used in hydraulic applications. The female fitting is suitable to protect quick release couplings ISO 7241-1 Series A and B.
The cap is designed to remain attached to the hose. It offers superior protection from the ingress of dirt and moisture, and resistance to corrosion.
Flexible End Caps - Oil and Grease Resistant are made of Vinyl providing good flexibility to protect threads an non threaded tips and is highly resistant to shredding. The green PVC can be used with oil and grease application. The design come with a hanging tab to work with hanging hooks.
End Tips Caps are versatile for a multitude of uses. They add protection from damage and ingress, as well as a neat finish to complete a look. Different materials and colours are available for a wide range of application uses.
Our Non-threaded End Caps are available in wide selection of sizes and are made from Low-Density Polyethylene, in blue. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement.
A range of protective caps designed for standard pipe sizes that are available at a low cost, but with a high quality finish. Our Standard Size Pipe Caps are available in a choice of material options; LDPE and Flexible PE, and cover a wide range of sizes.
These moulded caps are designed to grip over the external diameter of pipes and tubes, to prevent the ingress of foreign agents, during storage and shipping. There design allows for quick and easy assembly and removal, either by hand or with the use of automated equipment.
The range features caps that have internal ribs that ensure a tight fit and help release air pressure build up. In addition, the range includes caps that have a small vent hole. The vent hole allows the cap to be properly fitted, which also helps to eliminate air pressure.
Our range of high temperature Flexible End Caps come in a variety of sizes that are suitable for Metric, BSP and UNF threads. These Flexicaps are durable making them an ideal choice for a multitude of uses; their attractive vinyl appearance makes them particularly good for finished applications.
Made from flexible PVC (90 Shore) in yellow, which can withstand operating temperatures of up to 210C. These extremely pliant caps provide excellent chemical resistance and are an economical solution for one-time uses. Typical applications include; powder coating, e-coating, plating and general paint lines. The specially formulated PVC is unaffected by weather, oxidation, oils and moisture.
Scaffolding End Caps are an ideal solution for applying to the end of scaffolding poles and other applications due to their bright colours that allow for high visibility. They are quick and easy to use and can be uses indoors, as well as out. They are available in Yellow, Orange, Blue and Green and are made from LDPE.
Masking Star Tubing is ideal to mask long studs and pins where caps are too short. The star design profile allows the part to be flexible to fit easily on tight diameters. Our range includes a mix of colour options for easy size identification, including; Red, Yellow, White, Blue and Green.
Masking Straight Caps and Plugs fit over studs, pins or tube ends to provide an excellent masking solution. They can also be used as plug protection to mask threaded and non-threaded holes. The range comes in a selection of colours for easy size identification. The colours available include; Black, Natural, Blue, Green, Pink, Orange, Yellow, Purple and Grey. We also have a variety of sizes to suit your application needs.
These Masking Washer Caps can be applied as protective caps for threaded and non threaded end tips. The washer provides protection to the edge ensuring that the hole is safe from contaminants and damage. Our range includes a variety of colours for easy size identification, including; Natural, Grey, Black, Green, Red, Pink, Purple and Yellow. We offer a mix of sizes to suit many application requirements.
These Flexible End Caps with a Lanyard can accommodate a wide range of applications from cables and dust caps to enclosures and lids. The Elastomer linking tie is designed to connect and secure two separate components. The part can stretch up to 3 times its nominal length due to the flexible EPDM material.
Our Flexible Pipe Caps cover a wide range of larger sizes. The flexible PE material allows for easier fitting on pipes.
Expandable Masking Covers are an ideal alternative to a more conventional cap when the part to cover has an awkward shape. The Masking Covers are expandable by stretching with an elasticated end or by stretching through the elasticity of the material. The elasticated cap makes it a looser hold and therefore is best for a general protection during transport and storage or light masking requirement. The stretched material cap has a stronger hold on the part by gripping and therefore is best for application putting pressure on the part.
These Push-fit Round Vinyl End Caps are made from flexible PVC and can stretch on to larger dimensions for a snug fit without tearing, splitting, or shredding. The glossy and attractive finish makes this cap ideal for use as a decorative end cap. Our range is offered in Black or Red colour options.