Flanged Caps are designed to protect the thread of studs. They are used throughout the automotive and engineering industries for general protection uses. The flanges on the profiles have different sizes allowing a socket wrench to function without removing the protection. We offer a selection of materials, including; LDPE, TPR, PVC and Silicone. Our range also includes colour options; Natural, Red and Black and wide choice of sizes to suit your application needs.
Pull Tab Caps
Our Vinyl Pull Tab Caps have a large pull tab allowing easy removal from the component. The PVC or EVA material used for these ranges provide good tensile strength, toughness and increased flexibility. Our range includes colour options; Black, Red and Yellow, with a wide choice of sizes to suit your application needs.
Tear Tab Caps
These LDPE Tear Tab Caps are a rapid solution to fit and remove from the part. By pulling the tab, the cap splits wide open offering an easy solution to numerous applications. The range is suitable to UNF and NPT threads and is available in Natural, Blue and Yellow colours. We offer a wide range of sizes to suit many application needs.
Threaded Protection Caps - Metric Threads
These Polyethylene Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. They are suitable for Metric threads. Our range is available in Yellow or Red and a wide choice of sizes, to suit your application needs.
Threaded Sealing Caps - Metric Threads
Yellow Polyethylene Metric Threaded Sealing Caps are fitted with an internal neoprene rubber sealing disk to limit contamination from deposit and entry of particles. They are suitable to protect metric threads. While hand tightening is recommended, the cap can be applied or removed by spanner or socket at a low torque. Our range offers a choice of sizes to suit your needs.
Slottex Plugs are screw on protection plugs that can be applied or removed with screwdriver, spanner or socket. They can be tightened manually or with power tool. The range cover a large offering of dimensions suitable for Metric threads, BSP threads and UNF threads.
Snap Fit Plugs
Snap Fit Plugs have a single turn providing tight fit once pushed into position. The plug is design with a centre tab to allow a strong grip for tightening and easy removal. The range is suitable for Metric, BSP and UNF threads.
Threaded Protection Plugs - Metric Threads
Threaded Protection Plugs - Metric Threads are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and they offer an excellent protection from dirt, moisture and corrosion. They are suitable for Metric threads.
Threaded Protection Plugs - Quick Fit
Threaded Protection Plugs - Quick Fit are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and the short thread allows a quick fit on the part. Suitable for Metric, BSP and UNF thread sizes.
Hexagonal Caps are used to protect all common hydraulic coupling sizes. The design is suitable for protecting round components too and are fitted with a central tab for easy removal. They are suitable for Metric, BSP and UNF sizes. Our Hexagonal Caps range are made from Polyethylene and come in a Natural finish.
Round Vinyl End Caps
These Push-fit Round End Caps are made from flexible PVC and can stretch on to larger dimensions for a snug fit without tearing, splitting, or shredding. The glossy and attractive finish makes this cap ideal for use as a decorative end cap. Our range is offered in Black or Red colour options.