Tear Tab Caps
Tear Tab Caps are easy and rapid solution to remove the cap from the part. By png the tab, the cap split wide open offering an easy solution to numerous applications. The range is suitable to UNF and NPT threads.
Threaded Protection Caps - BSP/Gas Threads
Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. The range is suitable for BSP/Gas threads.
Threaded Sealing Caps - BSP/Gas Threads
Threaded Sealing Caps are used throughout the automotive, fluid power and engineering industries. They are recommended to be tightened by hand although the hexagonal head enables the cap to be applied or removed by spanner or socket at a low torque. The cap is fitted with an internal neoprene rubber sealing disk to limit fluid leakage. Suitable for BSP/Gas threads.
Slottex Plugs are screw on protection plugs that can be applied or removed with screwdriver, spanner or socket. They can be tightened manually or with power tool. The range cover a large offering of dimensions suitable for Metric threads, BSP threads and UNF threads.
Snap Fit Plugs
Snap Fit Plugs have a single turn providing tight fit once pushed into position. The plug is design with a centre tab to allow a strong grip for tightening and easy removal. The range is suitable for Metric, BSP and UNF threads.
Threaded O-ring Plugs - BSP/Gas Threads
Threaded O-ring Plugs - BSP/Gas Threads can be applied or removed by hand, hex wrench or screwdriver. The O-ring provides a water tight seal for superior leakage protection.
Threaded Protection Plugs - NPT Threads
Threaded Protection Plugs are made of nylon or HDPE to guard NPT Threads from contaminants and moisture during production and shipment. The easy to grip head design makes for efficient application and removal by hand or hand tool.
Threaded Protection Plugs - BSP/Gas Threads
Threaded Protection Plugs - BSP/Gas Threads are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and they offer an excellent protection from dirt, moisture and corrosion. They are suitable for BSP/Gas threads.
Threaded Protection Plugs - Quick Fit
Threaded Protection Plugs - Quick Fit are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and the short thread allows a quick fit on the part. Suitable for Metric, BSP and UNF thread sizes.
Hexagonal Caps are essentially used to protect all common hydraulic coupling sizes. The design is also suitable to protect round components and is fitted with a central tab for easy removal. They are suitable for Metric, BSP and UNF sizes.
Round Vinyl End Caps
Push-fit Vinyl Round End Caps can stretch onto larger dimensions for a snug fit without tearing, splitting, or shredding. The glossy and attractive finish makes this cap ideal for use as a decorative end cap.