End Caps

We found 23 product types for Hydraulic End Caps

Need a Quote?

For large volumes and customised products, add to your cart and click request a quote, or email sales@essentracomponents.it and we will respond within 2 working days

Filter Products

List Grid

Tube End Caps

In stock In production

Tube End Caps offer ideal protection for threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge that ensure a tight fit. The design of these longer caps helps to prevent accidental displacement. Tube End Caps serve the same purpose as Heat Shrink End Caps, but do not shrink when heated during the application process. They are UV and weather resistant, making them ideal outdoor applications.

{0} variants (Filters applied) {0} variants (No filters applied)

Standard Round End Caps

In stock In production

Standard Round End Caps are non-threaded and come available in either Red or Natural Nylon. We offer a wide range of sizes to suit your application. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement.

{0} variants (Filters applied) {0} variants (No filters applied)

Ribbed Pipe End Caps

In stock In production

These Ribbed Pipe End Caps are non-threaded and are available in either Red or Yellow, we offer a wide range of sizes to suit your application. They are ideal for protecting threaded or non-threaded pipes, tubes or rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement.

{0} variants (Filters applied) {0} variants (No filters applied)

Non-Threaded End Caps

In stock In production

Our Non-threaded End Caps are available in wide selection of sizes and are made from Low-Density Polyethylene, in blue. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement.

{0} variants (Filters applied) {0} variants (No filters applied)

Hose Washer Caps

In stock In production

Available in LDPE or TPR, these Hose Washer Caps are applied on hose and tube ends in order to prevent them from sliding over the fittings. Our range includes Yellow and Black colour options and offers a range of sizes to suit your application needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Flanged Caps

In stock In production

Flanged Caps are designed to protect the thread of studs. They are used throughout the automotive and engineering industries for general protection uses. The flanges on the profiles have different sizes allowing a socket wrench to function without removing the protection. We offer a selection of materials, including; LDPE, TPR, PVC and Silicone. Our range also includes colour options; Natural, Red and Black and wide choice of sizes to suit your application needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Pull Tab Caps

In stock In production

Our Vinyl Pull Tab Caps have a large pull tab allowing easy removal from the component. The PVC or EVA material used for these ranges provide good tensile strength, toughness and increased flexibility. Our range includes colour options; Black, Red and Yellow, with a wide choice of sizes to suit your application needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Tear Tab Caps

In stock In production

These LDPE Tear Tab Caps are a rapid solution to fit and remove from the part. By pulling the tab, the cap splits wide open offering an easy solution to numerous applications. The range is suitable to UNF and NPT threads and is available in Natural, Blue and Yellow colours. We offer a wide range of sizes to suit many application needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Tapered Caps & Plugs - Standard

In stock In production

Standard Tapered Caps & Plugs are designed for each part to cap multiple O.D.’s or plug multiple I.D.’s. The durable material protects against damage, dirt, moisture and corrosion during storage and shipping.

{0} variants (Filters applied) {0} variants (No filters applied)

Tapered Caps & Plugs - Heavy Duty

In stock In production

These LDPE Heavy Duty Tapered Caps & Plugs include a rugged wall and seal rings for maximum protection. The tapered profile allows the versatile part to plug multiple internal diameters or cap various external diameters. Our range is available in either Red or White.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Protection Caps - UNF/JIC Threads

In stock In production

These Polyethylene Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. They is suitable for UNF/JIC threads. Our range is available in Yellow or Red and a wide choice of sizes, to suit your application needs. You may also be interested in our range of Metric Threaded Caps.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Protection Caps - Metric Threads

In stock In production

These Polyethylene Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. They are suitable for Metric threads. Our range is available in Yellow or Red and a wide choice of sizes, to suit your application needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Protection Caps - BSP/Gas Threads

In stock In production

These Polyethylene Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. They are suitable for BSP/Gas threads. Our range is available in Yellow or Red and a wide choice of sizes, to suit your application needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Sealing Caps - UNF Threads

In stock In production

These Polyethylene UNF Threaded Sealing Caps protect and limit fluid leakage. They are resistant to solvents and reduce potential shearing. A neoprene sealing disk limits fluid leakage and the hexagonal head can be tightened by a wrench or socket at low torque but is hand tightening is recommended. Our range is available in Yellow or Red. You may also be interested in our range of Metric Sealing Caps and our selection of Threaded Plugs.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Sealing Caps - Metric Threads

In stock In production

Yellow Polyethylene Metric Threaded Sealing Caps are fitted with an internal neoprene rubber sealing disk to limit contamination from deposit and entry of particles. They are suitable to protect metric threads. While hand tightening is recommended, the cap can be applied or removed by spanner or socket at a low torque. Our range offers a choice of sizes to suit your needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Sealing Caps - BSP/Gas Threads

In stock In production

HDPE Threaded Sealing Caps are used throughout the automotive, fluid power and engineering industries. They are recommended to be tightened by hand although the hexagonal head enables the cap to be applied or removed by spanner or socket at a low torque. The cap is fitted with an internal neoprene rubber sealing disk to limit fluid leakage. Suitable for BSP/Gas threads. Our range is supplied in Yellow, with lots of size options available.

{0} variants (Filters applied) {0} variants (No filters applied)

Tapered Caps & Plugs - Wide Flange

In stock In production

The wide flange of these LDPE Tapered Caps & Plugs provides greater protection and easy removal. Designed for use as both a cap and a plug, they provide excellent protection from damage, dirt, moisture and corrosion during storage and transportation. Our range is available in Blue and Red.

{0} variants (Filters applied) {0} variants (No filters applied)

Banjo Bolt Caps

In stock In production

Featuring a Protection Cap and Retaining Washer in one unit; Banjo Bolt Caps hold everything together during assembly, storage and shipment, while protecting against damage and dirt ingress. They are easy to grip, even when wearing gloves. Our Banjo Bolt Caps are offered in Black Low-Density Polyethylene and a range of sizes to suit your application.

{0} variants (Filters applied) {0} variants (No filters applied)

Banjo Union Caps

In stock In production

Banjo Union Caps provide external protection to Banjo Bolts. Union Caps have quicker application and removal than dip-moulded alternatives. Banjo Swivel Joints provide 360 degree rotation in a single plane without leakage. The units establish mechanical flexibility into high pressure and temperature systems such as fuel pressure systems, turbo charging, air-conditioning and brake installations. Banjo Union Caps are typically used in hydraulic, pneumatic and automotive industries. Fit hydraulic Banjo Unions to DIN 7642 B/E. Our range of High-Density Polyethylene caps includes a selection of sizes in Red.

{0} variants (Filters applied) {0} variants (No filters applied)

Hexagonal Caps

In stock In production

Hexagonal Caps are used to protect all common hydraulic coupling sizes. The design is suitable for protecting round components too and are fitted with a central tab for easy removal. They are suitable for Metric, BSP and UNF sizes. Our Hexagonal Caps range are made from Polyethylene and come in a Natural finish.

{0} variants (Filters applied) {0} variants (No filters applied)

O-Ring Face Seal Caps

In stock In production

Our Blue Polyethylene O-Ring Face Seal Caps are designed to protect O-Ring Face Seal Connectors used on hydraulic connections. The longer overall length includes a moulded retaining ring at the bottom that snaps under the connector to keep it securely in place during transit and processing. Our range offers a variety of sizes to suit your application.

{0} variants (Filters applied) {0} variants (No filters applied)

Quick Release Caps

In stock In production

Hydraulic Quick Release Dust Caps are female fitting suitable to protect quick release couplings series ISO A and ISO B. They are designed to remain attached to the hose and offer excellent protection from dirt, moisture and corrosion. These caps are made from TPE and are available in several colour options; Blue, Green, Red and Yellow. Our range also offers a variety of size options to suit your application.

{0} variants (Filters applied) {0} variants (No filters applied)

Round Vinyl End Caps

In stock In production

These Push-fit Round Vinyl End Caps are made from flexible PVC and can stretch on to larger dimensions for a snug fit without tearing, splitting, or shredding. The glossy and attractive finish makes this cap ideal for use as a decorative end cap. Our range is offered in Black or Red colour options.

{0} variants (Filters applied) {0} variants (No filters applied)