Leaf Hinges - Threaded Stud Mount
Metal Leaf Hinges are available for applications for flush mounted doors with threaded stud installations. The range of Die-Cast Zinc Alloy hinges have a maximum rotation of 270 degrees and there are several types available all in either a Chrome Plated or Black Powder Coated Finish
Open/Close Position Hinges
Spring hinges have a centre pin with a spring attached, ensuring that the hinge always springs back into its starting position. Ideal for use on doors and panels that require a safety mechanism of returning to its original location.
Leaf Hinges - Half Threaded Stud & Half Counter Sunk
Metal Leaf Hinges are available for applications for flush mounted doors with half countersunk mounting holes on one side of the component and half threaded studs on the other. The range of Die-Cast Zinc Alloy hinges have a maximum rotation of 270 degrees and there are a number of types available.
Lift Off Screw Mount Hinge
Lift Off Screw Mount Hinges are easy lift-off function. They come in stainless steel and steel with either a zinc plated or black powder coated finish. They have an hinge rotation angle of 180 degree. The design is drilled to be screwed to the frame.
Counter Sunk Mount Leaf
Metal Leaf Hinges are available for applications for flush mounted doors with countersunk mounting holes. The range of Die-Cast Zinc Alloy hinges have a maximum rotation of 270 degrees and there are several types available. We also offer ranges in Premium, Round and Square Stainless Steel Hinges. The range of Flat Hinges operate with Stainless Steel Pin and come in either Steel with a Black Coated Finish or in Die-Cast Zinc Alloy and Delrin Bearing. The Steel hinges offer a very strong tamperproof hinge on a 270 degree rotational angle and is supplied with M8 x 12mm fixings. The Zinc hinge is on a 180 degree rotational angle
Leaf Hinges - Thru Hole with Cover Plate
Screw Covers Hinges are made from a Glass Fibre Reinforced PA with a rotation pin which offers a max angle of 200 degrees which is made from POM. They are available in a Black, matt finish. The rotation pin material ensures no corrosion. There are two types available. Type 1 includes a glossy plastic screw cover for excellent aesthetic appearance and hexagonal pass through holes for cylindrical screw or a hex nut screw. Type 2 has pass through holes for countersunk head screws
Adjustable Torque Hinges - w/Pin Screw
Heavy Duty Adjustable Torque Hinges have an adjustable holding torque with the aid of a setting key. The hinge articulates and holds a panel in position thus eliminating the need for a gas strut or lid stay. The holding torque is adjusted using a hex setting screw
Set Position Hinge Every 30 degree
Torque and detent hinges have great position control. The Detent Hinges are made of black anodised aluminium and are indented every 30 allowing panels to be positioned and maintained without auxiliary components. The Torque hinges are black coated die-cast alloy. They have position control down to the constant torque. There is no adjustment required.
Adjustable Torque Hinges - w/Leaf Screw
Adjustable Torque Hinges are operate with a single torque adjustment using the screw. They are used to hold doors or panels in position. The adjusting screw is made from stainless steel. The medium hinge is suitable for M4 fixings and the large hinge is suitable for M6 fixings both of which are not supplied
Threaded Insert Mount Leaf
Threaded Insert Mount Leaf Hinges are made from black nylon and are resistant to oil, greases, and most industrial chemicals. They come in a Matt Black finish and come with threaded brass inserts