Parts and Accessories Rotary Latches
(44 product groups)
Actuator plates are for use with our standard range of cams. When applied with our swinghandles and accompanying rods, users can benefit from a multi locking system.
Switch Accessories provide spares and accessories for our range of push buttons.
Cable Conduit Holder
The Cable Conduit holders are designed to keep cable conduit in place providing clean cable management solution along with our conduit ranges. Easy installation with a single screw.
Cable Gland Covers
Cable Gland Covers are ideal for blanking unused holes in an enclosure. They provide a secure covering and are simple to install and remove. They can be used with our range of Nylon Locknuts and Brass Locknuts that are available to buy separetely.
Cable Gland Inserts
These cable gland inserts are designed to fit inside a metric cable gland. They are available with a various number of holes that allow several cables to be led through it simultaneously. They provide excellent watertight protection for each wire. There is no need for a gland for each wire which reduces the space that is needed.
Cable Gland Washers
Cable Gland Washers are suitable to use with Essentra's range of Cable Glands and Locknuts. They are made of Neoprene, quick and easy to fit and will act as a seal.
Castor Wheels - Nylon
Nylon Caster Wheels have excellent wear and impact resistance for light to heavy-duty applications. These wheels roll and swivel easer with heavy loads where quiet operation is not critical.
Castor Wheels - Phenolic
Phenolic Caster Wheels are molded under high pressure and temperature for a hardness that can be used for standing loads. These wheels are resistant to high temperatures, water, and chemicals.
Castor Wheels - Polyurethane
Versatile Polyurethane Caster Wheels provide excellent floor protection and quiet operation. These wheels are ideal for equipment that is not moved often and have excellent abrasion resistance.
Castor Wheels - Rubber
Rubber Wheels provide a cushioned ride and quiet operation for equipment that is moved often. These wheels roll and swivel easier with light loads and are suitable for uneven and hard surfaces.
Castor Wheels - Swivel Plate/Plastic
Castor Wheels - Swivel Plate/Plastic have superior resistance to abrasion for equipment that is not moved often. These wheels roll and swivel easier with medium loads where quiet operation is not critical.
Castor Wheels - Thermoplastic
Thermoplastic Castor Wheels roll easily, quietly, and provide excellent floor protection. These wheels are recommended for light to medium loads as the soft material allows for smooth action.
Castor Wheels - Thermoplastic Polymer
Thermoplastic Polymer Caster Wheels roll easily, quietly, and provide excellent floor protection. These wheels are recommended for light to medium loads as the soft material allows for smooth action.
Castor Wheels - Twin Wheel
Caster Wheels - Twin Wheels.
Conduit Edge Clips
These clips are designed to mount onto the edge of a panel, requiring no through hole. They come in several styles that hold different corrugated tube sizes.
Conduit Fittings - Metal Conduit to Equipment
Conduit Fittings are made of nickel plated brass. They are a two-part fitting comprising shell and body. There is a choice between a Fixed External Thread Fitting and a Swivel External Thread Fitting.
Conduit Fittings - PVC Coated Steel Conduit to Equipment
Swivel External Thread Nickel Plated Brass Two-part fitting comprising shell and body. The external thread swivels about the main body. Can be used with threaded entries, or knockout secured with a locknut.
Conduit Fittings - Plastic Conduit to Equipment, Plastic
Conduit Fittings are the perfect accompaniment to Essentra's range of conduit. Typical applications include: buildings, particularly when buried in concrete and plaster.
The Dust Caps are additional accessories to suit locks with 20.2 x 22.2 fixing holes. They protect the lock and prevent the ingress of dirt and moisture that could damage the locking system.
The Quarter Turn lock range is supplied with a range of accessories including fixing rings. These are supplied in two different types; one in Spring Steel and the other in Die Cast Zinc. They are suitable for all locks with a 20.2 x 22.2 fixing hole.
Flange Protector Retainer Plugs
Flange Protector Retainer Plugs are an effective solution for securing full face protective discs to the flange surface. Simply insert the plug through the flange protector and directly into the bolt holes for firm, secure protection. Four plugs are recommended to firmly fasten each full face protective disc.
Plastic Key Tags are very economical with an inlay card, window and metal split ring all included. The help with good key management and security in retail premises. Available in 8 assorted colours