(12 product groups)
Connector Dust Caps with Lanyard
Fibre Dust Caps and Dust Caps with Metal Chain prevent unwanted foreign bodies and dirt getting into fibres and wires.
Fibre Bend Limiting Tubing
Optical Fibre Bend Limiting Tubing offers the ultimate protection to fibres eliminating problems such as crushing, kinking and micro bending whilst supplying an entire self-managing solution to managing the routing of fibre
Fibre Bend Limiting Tubing - 1 to 4 Breakout
These Optical Fibre Manifold enables small multiple fibre cables with aramid to be mechanically and securely terminated. The manifold is stackable and provides breakout for up to 4 wires. A development kit is also available that contains all adapters, OFM-4-05-19BLK.
Fibre Bend Limiting Tubing - Clips, Hinged Top Lock
Fibre Bend Limiting Tubing Clips are snap fitting for easy installation and allow the running of Fibre Bend Limiting Tubing along a panel, enclosure or racking unit. They are hinge fitted which also aids the ease of installation and removal
Fibre Bend Limiting Tubing - Clips, Slotted
Optical Fibre Slotted Multi Brackets are designed using Miniflex technology. They are used at distribution points where orderly fibre management, protection and strain relief are required. An additional security feature allows fitting of a cable tie around the part which prevents removal of any retained tubes. They will hold a maximum of 12 tubes
Fibre Bend Limiting Tubing - Clips, Snap in
Fibre Bend Limiting Tubing can be mounted using saddles such as the Snap in Clips. These are simple to install and come in two different types
Fibre Bend Limiting Tubing - Clips, Standoff
Fibre Bend Limiting Tubing can be mounted using Tube and Pip Clips such as the Standoff Clips. These are simple to install and come in two different material types
Fibre Bend Limiting Tubing - Duplexer
Push-fit barbed cross fittings for connecting four tubes together.
Fibre Cutout Adapters
Fibre Cut-out Adapters convert a hole cut-out for an SC connector into a hole cut-out for an ST connector. The Optical Fibre Duplexer enables cable with aramid strands to be broken out and mechanically terminated.
Fibre Optic Connector Boots
The Fibre Management range provides Fibre Boots which provide strain relief for Micron Fibres. They provide added protection to the fibre while routing through a hole
Rotary Latch Accessories
Rotary Latch accessories offer maximum security and convenience in push-to-close engineering.
Remotely opening exterior and interior doors, bonnet or compartments, rotary latches offer maximum security and convenience in push-to-close engineering.