Metal Nuts

 (9 products)

Need a Quote?

For large volumes and customised products, add to your cart and click request a quote, or email sales@essentracomponents.hu and we will respond within 2 working days

Filter Products

List Grid

Cage Nuts

In stock In production

Cage Nuts are applied to square holes, commonly found on mounting rails of equipment racks. The combination of a square hole and cage nut is used within rack systems as this allows for a choice of nut and bolt sizes; if threads are damaged the nut can be easily replaced because the sheet metal is too thin to tap or thread. Our range is made from Steel and are available in several sizes to suit your application.

{0} variants (Filters applied) {0} variants (No filters applied)

Cam Lock Nuts

In stock In production

Zinc alloy Cam Lock Nuts offer a secure internal fitting for wooden furniture with 3 finishing options.

{0} variants (Filters applied) {0} variants (No filters applied)

Cross Dowel Barrel Nuts

In stock In production

Cross Dowel Barrel Nuts are designed to be used with Joint Connector Bolts where a right angle connection is needed. The M6 nuts are supplied in a zinc alloy material for a cost-effective solution whereas the M8 nuts are supplied in steel for additional strength. The M8 nuts are therefore ideal where heavier applications are required - typically on boards of a 22mm thickness upwards. Customers also regularly buy our Joint Connector Bolts - browse our range here.

{0} variants (Filters applied) {0} variants (No filters applied)

Dome Nuts - Metal

In stock In production

Cap Nuts are ideal for covering and protecting a bolt or screw that sits proud of your application

{0} variants (Filters applied) {0} variants (No filters applied)

Dome Nuts - Nylon

In stock In production

Dome Nuts are ideal for covering and protecting a bolt or screw that sits proud of your application.

{0} variants (Filters applied) {0} variants (No filters applied)

Furniture Mount T-Nuts

In stock In production

Furniture Mount T-Nuts are ideal for use with Essentra's range of adjustable feet, tilt glides castors and locking bolts. They are easy to assemble, simply insert into a pre-drilled hole and tap into place with a hammer. They are self-locking to prevent rotation during hand or automatic assembly

{0} variants (Filters applied) {0} variants (No filters applied)

Joint Connector Nuts

In stock In production

Joint Connector Nuts are designed to be used with Joint Connector bolts. The head size of the bolt and nut match, thus providing an excellent surface finish on both sides of the assembly. They are easily applied with an Allen key

{0} variants (Filters applied) {0} variants (No filters applied)

Lock & Flange Nuts - Metal

In stock In production

A Flange Nut is a hex nut with a flange on the base, acting as an integrated washer. This spreads the load and prevents damage to the part, while also reducing the risk of the nut loosening in application.

{0} variants (Filters applied) {0} variants (No filters applied)

Nyloc Nuts

In stock In production

Locking Nuts prevent any loosening thanks to their excellent anti-vibration properties.

{0} variants (Filters applied) {0} variants (No filters applied)