Threaded Caps & Plugs
(7 product groups)
Slottex Plugs are screw on protection plugs that can be applied or removed with screwdriver, spanner or socket. They can be tightened manually or with power tool. The range cover a large offering of dimensions suitable for Metric threads, BSP threads and UNF threads.
Snap Fit Plugs
Snap Fit Plugs have a single turn providing tight fit once pushed into position. The plug is design with a centre tab to allow a strong grip for tightening and easy removal. The range is suitable for Metric, BSP and UNF threads.
Threaded O-ring Plugs - Metric Threads
Threaded O-Ring Plugs are equipped with a compressing flange lip and O-ring for a watertight seal and superior leakage protection for hydraulic threads. Can be applied and removed by hand, wrench, socket, or screwdriver. Available in Metric, UNF and BSP Gas threads.
Threaded Protection Caps - Metric Threads
These Polyethylene Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. They are suitable for Metric threads. Our range is available in Yellow or Red and a wide choice of sizes, to suit your application needs.
Threaded Protection Plugs - Metric Threads
Threaded Protection Plugs - Metric Threads are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and they offer an excellent protection from dirt, moisture and corrosion. They are available in UNF, NPT, Metric and BSP/Gas threads.
Threaded Protection Plugs - Quick Fit
Threaded Protection Plugs - Quick Fit are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and the short thread allows a quick fit on the part. Suitable for Metric, BSP and UNF thread sizes.
Threaded Sealing Caps - Metric Threads
Yellow Polyethylene Metric Threaded Sealing Caps are fitted with an internal neoprene rubber sealing disk to limit contamination from deposit and entry of particles. They are suitable to protect metric threads. While hand tightening is recommended, the cap can be applied or removed by spanner or socket at a low torque. Our range offers a choice of sizes to suit your needs.