Steel

Mini Quarter Turn Latches with 45 degree Housing are specially designed with an internal spring which provides 1mm of torsion. The cam sits at a 45 degree angle to the housing. Both Chrome and Black Coated latches are available with different head style and grip range options

Actuator plates are for use with our standard range of cams. When applied with our swinghandles and accompanying rods, users can benefit from a multi locking system.

Adjustable T Handle w/ Compression are used for cabinets that require better sealing under vibration conditions. They are available in locking and non-locking versions.

Lift and Turn Cam Latches consist of a low profile handle which stows away when not in use. They offer a 90 degree rotation and are simple to install using either a bracket or a snap in fixing. The swing handles also consist of a slam action spring loaded handle and can be used either indoors or outdoors. They are ideal for cabinets, enclosures and machinery covers. They come with a choice of keyed alike, key to differ or a button to press.

Cylinder Locking Quarter Turn Latches include a range of products including Push Button Latches, Clip On Quarter Turn Latches and Cylinder Cam Locks Push Button Latches have a push button opening and slam lock closing action. They are single hole installation and suit panels with a thickness of up to 16mm. The are complete with handle pull and catch place and are supplied with 2 keys (CH751) Clip On Quarter Turn Latches include a body and a clip. They involve tool-less assembly for quick and easy mounting and have up to a 90 degree rotation angle. The latch can be mounted onto doors with thicknesses of up to 6mm and are ideal for lightweight door applications. Cylinder Cam Locks offer keyed alike, keyed to differ and master key options. The master key versions are keyed different with a master key that will open all locks. The master keys must be ordered separately. Each key is supplied with 2 locks

Cam Locks with Wing Knobs are supplied with a rubber gasket for a good seal. There are 3 different types available offering different material and grip range options

The Adjustable Compression T Handle Lock is used for cabinets requiring better sealing under vibration condition. The latch provides a 6 mm of compression to increase noise isolation. 3 alternative cams are available to enable a cam forward and cam reverse action. A wide range of grip range is achievable with the adjustable screw. 2 different cut out are available for this range.

This Compression T Handle Lock is used for cabinets requiring better sealing under vibration condition. The latch provides 6 mm of compression to increase noise isolation. Standard cams without stoppers are required and 2 different cut out are available for this range.

The Compression Lock with Wing Knob is used for cabinets requiring better sealing under vibrating condition. The latch provides a 6 mm of compression to increase noise isolation. Standard cams without stoppers are required and 2 different cut out are available for this range.

Cylinder Locking Cam Latches have a chrome plated die-cast zinc alloy body with a steel cam. The range fits different cut outs and offer a choice of key alike, key to deffer.Various rotation angles are available depending on the selection.

Flexible Over Centre Drawer Latches have a low profile design and the keeper is concealed and fixed under the latch to aid this design feature. The handle is made from black rubber making it non-corrosive and if fixed using standard M4 screws (not supplied)

Spring Loaded Socket is a latch working with a spring system to operate the lock and release mechanism. This door latch is compatible with two strikers to be ordered independantly depending on the mounting requirement.

Fixed Compression Latches are IP65 rated and are made from a Black Powder Coated Die-Cast Zinc. They offer a 6mm compression. When the key is turned 90 degrees the cam turns to the locking position. When the key is turned 180 degrees the cam moves to the fixing position. The latch provides both good compression and good noise isolation with different head style and grip range options available

The Quarter Turn lock range is supplied with a range of accessories including fixing rings. These are supplied in two different types; one in Spring Steel and the other in Die Cast Zinc. They are suitable for all locks with a 20.2 x 22.2 fixing hole.

Flush Trigger Handle Latches are available in either a 0-24mm or 24-26mm adjustable grip range. They can come as either keyed alike (5333), keyed different or with no lock and they are supplied with 2 keys per lock. They are suitable for a panel thickness of less than, and including, 2mm and consist of an aesthetically pleasing flush trigger design

Cupboard Locks are designed with a Steel cupboard lock with a plastic body. They are suitable for heavy duty applications such as steel cupboards and the rod assembly is made easy thanks to the special fixing plate. The clip on body also aids assembly making this a simple to install part. Also included is a stainless steel dust cap and the locks can be bought for either keyed alike or keyed to differ specifications

This range of locks are ideal for sliding glass door applications. The range offers a key alike and key to differ option. along with various methods of fitting.

This range of Cupboard Locks are classified as heavy duty to suit large cabinets made of steel or wood. The design is flushed to provide a flat surface on the cabinet. A choice of finishes allows an aesthetic appeal and selection of key alike, key to differ or no key provide different level of security.

Sprung Bolt Drawer Locks are available for high security applications. They are rim/surface fixing slam shut drawer locks recommended for wooden drawers. For added security, the lock has been anti-drill centred and the key is removable only in the locked position. A Flange Fixing version is available designed specifically for sliding wooden doors. This push lock is ideal for stock cupboards, counter units, and wooden display cabinets. The push to lock action saves time in busy retail environments. They offer a good level of security and have an anti-drill centre. The Budget Push lock with Nut Fixing has a disc tumbler mechanism which provides a convenient push to lock, key to open operation. The lock movement is just 45 degrees with the key free in the open position. This lock fits a standard double D mounting hole and is suitable for sliding doors, display cabinets and glass fronted notice boards

This range of locks is ideal for wooden furniture drawers and cupboards. The design and finishes are stylish to provide an aesthetic appeal to the finished applications. A key to differ and key alike selection offer a choice of security.

Handle Turn Cam Latches - Adjustable are used in applications such as electric panels and machinery covers. The range comes with a black or chrome finish. They are available with 2 key alike or 2 key differ.

Handle Turn Cam Latches - L Handle are used in applications such as electric panels and machinery covers. The range comes with a black or chrome finish. They are available with 2 key alike or 2 key differ.

Mini Cam Locks with Wing Knobs are ideal for lighter weight applications where space is at a premium. They are available in either Chrome Plated or Black Powder Coated Die-Cast Zinc and in an array of grip ranges

Handle Turn Cam Latches - T Handle are used in applications such as electric panels and machinery covers. The range comes with a black or chrome finish. They are available with 2 key alike or 2 key differ.