(168 product groups)
45 Degree Mounting Mini Cam Latch w/ Spring
Mini Quarter Turn Latches with 45 degree Housing are specially designed with an internal spring which provides 1mm of torsion. The cam sits at a 45 degree angle to the housing. Both Chrome and Black Coated latches are available with different head style and grip range options
90 Degree Offset Corner Hinge
90 Degree Offset Corner Hinges come in different profiles to fit a combination of possibilities to offset the door to the frame.
Actuator plates are for use with our standard range of cams. When applied with our swinghandles and accompanying rods, users can benefit from a multi locking system.
Adjustable Feet - Chrome Capped
These Chrome Capped Adjustable Feet are an inexpensive solution for light-duty applications on slightly uneven surfaces, including office furniture, shelving, point of purchase displays, cabinetry, and small machinery. The range are made from chrome capped black Polyethylene (PE).
Adjustable Feet - Non Articulating
Stud Mount Leveling Feet with a Plastic Swivel Base adjusts to uneven surfaces and level machine tools, electronic racks, and similar applications. The articulating swivel and large diameter pads provide solid leveling and support.
Adjustable Feet - Standard/Non Articulating
Adjustable Feet - Standard/Non Articulating with a Plastic Rigid Base adjust to uneven surfaces and level machine tools, electronic racks, and similar applications. The plastic base provides a smooth non-abrasive surface that protects floors.
Adjustable T Handle w/ Compression
Adjustable T Handle w/ Compression are used for cabinets that require better sealing under vibration conditions. They are available in locking and non-locking versions.
Adjusters - Level Mount
Adjusters - Level Mount adjust to uneven surfaces and level machine tools, electronic racks, and similar applications.
These philips head shoulder screws are meant to be used in conjunction with the VG series vibration grommets. Other ranges that are customers browse when buying Philips Head Shoulder screws are Standard Hex Nuts – available in both metal and plastic.
Ball Transfers - Euro Ball
Euro Ball Transfers are ideal for applications such as; Cargo and baggage handling, assembly lines, machine loading, sliding door systems & machine tables. Euro transfer units have special toughened steel bearing cup, with a dirt exit hole and woolen felt the seal. Attached using Essentra range of fixing clips.
Ball Transfers - Heavy Duty
Heavy Duty Ball Transfers have a high load capacity & are built to provide a long working life. They incorporate a dust seal and dirt exit hole for maximum efficiency and smooth running.
Ball Transfers - Hevi-Load
Hevi-Load Ball Transfers are designed and manufactured to precise standards. We offer a range of ball sizes that offer load capacity from 35KG to 1000KG. All Hevi-Load units are anti-corrosive and have a black coated finish.
Ball Transfers - Low Profile
Essentra's range of Low-Profile Ball Transfers has a flange fixing and a dirt exit hole. They are lubricated, so no need for further attention. They are available in carbon steel, nylon & stainless-steel load bearings.
Ball Transfers - Med Duty
Large load-bearing ball, which sits upon many small balls encapsulated in a hemispherical cup. Typical applications of these Medium Duty Ball Transfers are; Cargo and Baggage handling, assembly lines, machine loading, sliding door systems & machine tables. They have a large support area, greater stability & a drilled hole fixing.
Ball Transfers - Mini
Mini Ball Transfers are suitable for applications such as; measuring equipment, guides for small linear motion (e.g. photocopier slides), transfer material in clean rooms & miniature mechanisms. They all have a stainless steel screw thread system and can be supplied as a flat top or angled top.
Ball Transfers - Spring Loaded
Shears, presses, and molding machines are just a few of the many applications where open loaded ball transfers can be used. A press, for example, may have spring-loaded ball units set in the platen to facilitate the on and off loading ball units set in the platen to facilitate the on and off loading of the workpiece. When the press operates the springs compress and the ball units sink below the surface-leaving the workpiece on a firm base. When pressure is released, the ball units rise to allow the ball to roll, enabling the workpiece to be removed easily.
A large range of Self-Centering Bonded Washers and kits are available for use in hydraulic and pneumatic applications including ranges of both imperial and metric sizes
Book Binding Screws - Metal
Screw the threaded part and the receptacle together in seconds for a quick, easy and secure binding component. This is the male or threaded side. The female receptacle parts are sold separately. Male and female parts are sold separately.
The Cable Conduit range has been developed and tested to the most demanding quality standards and have been awarded quality approvals and compliance worldwide. The range supports plastic conduit systems and accessories. Plastic conduit is highly flexible and has a high fatigue life. Its high impact strength aids to its recovery capability when crushed. Typical applications for this type of conduit include general factory wiring and connections to machines. Comes in a variety of materials depending on your requirements.
Cage Nuts are applied to square holes, commonly found on mounting rails of equipment racks. The combination of a square hole and cage nut is used within rack systems as this allows for a choice of nut and bolt sizes; if threads are damaged the nut can be easily replaced because the sheet metal is too thin to tap or thread. Our range is made from Steel and are available in several sizes to suit your application.
Cam Latches - Lift & Turn
Lift and Turn Cam Latches consist of a low profile handle which stows away when not in use. They offer a 90 degree rotation and are simple to install using either a bracket or a snap in fixing. The swing handles also consist of a slam action spring loaded handle and can be used either indoors or outdoors. They are ideal for cabinets, enclosures and machinery covers. They come with a choice of keyed alike, key to differ or a button to press.
Cam Lock Nuts
Zinc alloy Cam Lock Nuts offer a secure internal fitting for wooden furniture with 3 finishing options.
Cam Locks - Cylinder Locking
Cylinder Locking Quarter Turn Latches include a range of products including Push Button Latches, Clip On Quarter Turn Latches and Cylinder Cam Locks Push Button Latches have a push button opening and slam lock closing action. They are single hole installation and suit panels with a thickness of up to 16mm. The are complete with handle pull and catch place and are supplied with 2 keys (CH751) Clip On Quarter Turn Latches include a body and a clip. They involve tool-less assembly for quick and easy mounting and have up to a 90 degree rotation angle. The latch can be mounted onto doors with thicknesses of up to 6mm and are ideal for lightweight door applications. Cylinder Cam Locks offer keyed alike, keyed to differ and master key options. The master key versions are keyed different with a master key that will open all locks. The master keys must be ordered separately. Each key is supplied with 2 locks
Cam Locks - Wing Knobs
Cam Locks with Wing Knobs are supplied with a rubber gasket for a good seal. There are 3 different types available offering different material and grip range options
Castor Wheels - Swivel Bolt Hole & Stem with Brake
Castor Wheels - Swivel Bolt Hole & Stem With Brake can be used as a general-purpose caster where full 360-degree rotation is required. The bolt hole in the caster frame allows for secure mounting to bolt threads.