Fibre Optic Cable Management

 (49 products)

Need a Quote?

For large volumes and customised products, add to your cart and click request a quote, or email sales@essentracomponents.fr and we will respond within 2 working days

Filter Products

  • of 2
List Grid

Connector Dust Caps with Chain

In stock In production

Connector Dust Caps with Chains are threaded onto connector adapters when unmated to provide mechanical and environmental protection. The stainless steel material is suitable for harsh conditions.

{0} variants (Filters applied) {0} variants (No filters applied)

Connector Dust Caps with Lanyard

In stock In production

Fibre Dust Caps and Dust Caps with Metal Chain prevent unwanted foreign bodies and dirt getting into fibres and wires.

{0} variants (Filters applied) {0} variants (No filters applied)

Dust cap - Cover/PVC

In stock In production

Dust Caps provide environmental protection for SMA, ST and FC connector adapters. The flexible PVC material is durable and provides a snug fit.

{0} variants (Filters applied) {0} variants (No filters applied)

FC Connector Port Dust Caps

In stock In production

FC Connector Port Dust Caps are threaded onto FC connector adapters to provide protection from outside elements. The cost-effective HDPE material is durable and available in a variety of colors.

{0} variants (Filters applied) {0} variants (No filters applied)

Ferrule Dust Cap

In stock In production

Ferrule Dust Caps provide environmental protection for 2.5mm ferrules. The flexible TPE material is Ro. HS compliant, durable, and provides a snug fit.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Accessories

In stock In production

Fibre bend accessories can be used in combination with our fibre protection range.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing

In stock In production

Optical Fibre Bend Limiting Tubing offers the ultimate protection to fibres eliminating problems such as crushing, kinking and micro bending whilst supplying an entire self-managing solution to managing the routing of fibre

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing - 1 to 4 Breakout

In stock In production

These Optical Fibre Manifold enables small multiple fibre cables with aramid to be mechanically and securely terminated. The manifold is stackable and provides breakout for up to 4 wires. A development kit is also available that contains all adapters, OFM-4-05-19BLK.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing - Clips, Hinged Top Lock

In stock In production

Fibre Bend Limiting Tubing Clips are snap fitting for easy installation and allow the running of Fibre Bend Limiting Tubing along a panel, enclosure or racking unit. They are hinge fitted which also aids the ease of installation and removal

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing - Clips, Slotted

In stock In production

Optical Fibre Slotted Multi Brackets are designed using Miniflex technology. They are used at distribution points where orderly fibre management, protection and strain relief are required. An additional security feature allows fitting of a cable tie around the part which prevents removal of any retained tubes. They will hold a maximum of 12 tubes

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing - Clips, Snap in

In stock In production

Fibre Bend Limiting Tubing can be mounted using saddles such as the Snap in Clips. These are simple to install and come in two different types

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing - Clips, Standoff

In stock In production

Fibre Bend Limiting Tubing can be mounted using Tube and Pip Clips such as the Standoff Clips. These are simple to install and come in two different material types

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing - Duplexer

In stock In production

Push-fit barbed cross fittings for connecting four tubes together.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing Tools

In stock In production

These OFBLT zip tools are used to install fibre into the OFBLTS slit tubing. The fibre is slid into the side of the tool. This is followed by the slit tubing being fed over the horn of the tool. The tool is then slid into the slit tubing, thus installing the fibre.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bracket - Coiling Clip

In stock In production

The optical Fibre spool is made of two extruded clips that snap into each other to form a clip with a smooth, curved surface to accommodate fibre optic bundles.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bracket - Quarter Turn

In stock In production

The range of Fibre Management products supports rack brackets which mount into a 19 inch rack with a quarter turn. These can be used to run optical fibre alongside a racking unit.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 16 Slot - 3.9mm, 3.4mm, 2.9mm

In stock In production

16 Slot Fibre Clips are designed to hold six 3.4mm, 3.9mm or 2.9mm diameter fibres. They can form a part of the larger EFA04 18 fibre clip which can be broken down to form individual clips which provides plenty of versatility

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 16 Slot - 3mm, 2mm

In stock In production

16 Way Fibre Clip can be broken apart to form 3 individual clips holding 4, 4 and 8 components. A broken apart 4-way can be used in the Splice Tray EFA04 25 001

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 2 Slot - 6mm, 5.5mm, 4.5mm

In stock In production

2 Slot Fibre Clips are designed for use in the Array Tray EFA04-25-001. They can be screw mounted or mounted with self adhesive pads. They act as an Isolator Clip

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 2 Slot, 2mm, Adhesive Mount

In stock In production

Holds up to four 2mm cables. Each slot can hold 2 cables. Small footprint.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 24 Slot, Splice Holder

In stock In production

24-Way Splice Holders are designed to hold up to 24 Splices or components and come with a range of mounting options; either adhesive mounting, no adhesive or screw mount

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 3 & 5 Slot, 6 & 9 Cables, 2mm, Snap In

In stock In production

The Fibre Management range supports Optical Fibre Brackets which are snap-in for an ease of installation. Both 3 and 5 slot mounting brackets are available

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 3 Slot - 3mm

In stock In production

3 Slot Fibre Clips are designed to hold three 3mm diameter fibres or other components such as couplers, splice protectors or WDM's

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 3 Slot, 6 Cables, 3mm, Adhesive Mount

In stock In production

Optical Fibre Expandable Brackets are 3 slot but can hold up to 6 cables of 3mm diameter. They have an adhesive mount for easier installation

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 4 Slot - 3.9mm

In stock In production

4 Slot Fibre Clips are designed to hold four 3.9mm diameter fibres. They can form a part of the larger EFA04 18 fibre clip which can be broken down to form individual clips which provides plenty of versatility

{0} variants (Filters applied) {0} variants (No filters applied)
  • of 2