A range of Replacement and Alternative Steel Cams are available for our range of Locks. The Replacement Cams are suitable for all standard quarter turns and cam locks. They provide an alternative grip range is used with pre-assembled locks. Cams in this range are additional and all locks throughout the range are provided with the cam stated for each range. There are 2 types of Alternative Steel Cams available. Type 1 is to fit parts 492878 through to 492882 and are zinc plated to prevent corrosion. The cranks cams are used to increase or decrease the effective length of the cam lock. Part 492895 has both a vertical and horizontal hole to allow fitting at all four quarter hour positions. Type 2 offers the same properties as type 1 but is to fit parts 492883 through to 492890
The Quarter Turn lock range is supplied with a range of accessories including dust caps. These are supplied to prevent dust particles from clogging up a lock. They are suitable for all locks with a 20.2 x 22.2 fixing hole
Toggle Clamp Spindle Assemblies - Flat-Tip Bonded Neoprene
Flat Tip Bonded Neoprene Spindle Assemblies provide an alternative to the spindle provided with the toggle clamp. The steel spindle is durable while the flat neoprene tip minimizes marking fragile or polished surfaces.
Flange Protector Retainer Plugs
Flange Protector Retainer Plugs are an effective solution for securing full face protective discs to the flange surface. Simply insert the plug through the flange protector and directly into the bolt holes for firm, secure protection. Four plugs are recommended to firmly fasten each full face protective disc.
Castor Wheels - Phenolic
Phenolic Caster Wheels are molded under high pressure and temperature for a hardness that can be used for standing loads. These wheels are resistant to high temperatures, water, and chemicals.
Locknuts for Cam Locks
Plastic Quarter Turn Spring Latches are a lightweight alternative to their metallic counterparts. They are supplied with a metal lock nut but the plastic lock nut can be purchased separately
Single Rod Assemblies Kit
Rod assemblies for two and three point installations of flush recessed latches. Rod assemblies include guide, keeper, and rod. Aluminum rods are .34" diameter. Rod assemblies have a .75" throw. Guide and keeper brackets are 1010 steel with black nylon inserts. Latch is not included and must be purchased separately.
Clamping Levers - Tapered Handle/Threaded Stud
Tapered Male Clamping Handles are operated by a simple lift and rotate action with a push button for releasing and adjustment. The tapered handle allows for convenient positioning for maximum leverage when mounted onto female threaded applications.
Cam Levers - Threaded Insert
Internal Thread Cam Levers allow quick fastening or unfastening without the use of tools and allow fine adjustments to the clamping action. Releasing the handle disengages the lever for tightening or loosening while the insert or stud remains stationary.
Clamping Levers - Tapered Handle/Threaded Insert
Tapered Female Clamping Handles are operated by a simple lift and rotate action with a push button for releasing and adjustment. The tapered handle allows for convenient positioning for maximum leverage when mounted onto male threaded applications.
Clamping Levers - Teardrop Handle/Threaded Stud
Teardrop Male Clamping Handles are operated by a simple lift and rotate action with a push button for releasing and adjustment. The teardrop handle allows for convenient positioning for maximum leverage as well as saving space to keep the handle out of the way.
Spring Plungers - Threaded/Locking
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures, and tables. Suitable for gym equipment, medical aids, catering equipment, conveyors, etc.
Castor Wheels - Nylon
Nylon Caster Wheels have excellent wear and impact resistance for light to heavy-duty applications. These wheels roll and swivel easer with heavy loads where quiet operation is not critical.
Castor Wheels - Thermoplastic Polymer
Thermoplastic Polymer Caster Wheels roll easily, quietly, and provide excellent floor protection. These wheels are recommended for light to medium loads as the soft material allows for smooth action.
Castor Wheels - Swivel Plate/Plastic
Castor Wheels - Swivel Plate/Plastic have superior resistance to abrasion for equipment that is not moved often. These wheels roll and swivel easier with medium loads where quiet operation is not critical.
The Quarter Turn lock range is supplied with a range of accessories including fixing rings. These are supplied in two different types; one in Spring Steel and the other in Die Cast Zinc. They are suitable for all locks with a 20.2 x 22.2 fixing hole.
Cam Lock Wood Washer and Cam Lock Locating Plates are supported by the display locks range. The wood washer prevents a cam lock from rotating in wooden applications where it is convenient to drill are round hole for fitting the lock. The locating or mounting plate is steel and enable a cam lock with a 19mm x 15.9mm double D profile to be fixed securely