Rivets

We found 16 product types for Non Removable Rivets

Need a Quote?

For large volumes and customised products, add to your cart and click request a quote, or email sales@essentracomponents.es and we will respond within 2 working days

Filter Products

List Grid

Push-In Rivets - Countersunk

In stock In production

Countersunk design for flush surface. Tamper resistant design. Accomodates countersunk hole specification DIN ISO 7721. Available in black or white. Easily installed by hand

{0} variants (Filters applied) {0} variants (No filters applied)

Push-In Rivets - Load Spreading Rivets

In stock In production

{0} variants (Filters applied) {0} variants (No filters applied)

Push-in Rivets - Barbed

In stock In production

These fir tree or barbed rivets have a ribbed design that ensures a fast and easy installation while securely holding into various materials such as wood, metal, foam, rubber and plastic. When pushed into a hole, the flexible ribs deflect then spring back to lock securely in place. Available in over 100 sizes and styles for different hole diameters and panel thicknesses.

{0} variants (Filters applied) {0} variants (No filters applied)

Push-In Rivets - Key Hole Clip

In stock In production

These fasteners have a unique key-hole shaped interior which increases flexibility for easy assembly by hand. Angled panel lock section that takes up slack in panels to provide a tight fit. Available for a variety of hole diameters and panel thicknesses

{0} variants (Filters applied) {0} variants (No filters applied)

Snap-Together Rivets - Male/Female Ratchet

In stock In production

The male clip is ratcheted into the female washer to hold surfaces together. Ideal for fixing corrugated panels. Fast installation. One pack contains 1,000 each of the clips and washers. Colours: Black, White and High Clarity. Washers - LDPE, Clips - PP

{0} variants (Filters applied) {0} variants (No filters applied)

Push-In Rivets - Snap Lock Pins

In stock In production

Commonly used to fix connector's to printed circuit boards. Easily installed by hand. 4 different styles in a UL94 V-2 rated Nylon 6/6.

{0} variants (Filters applied) {0} variants (No filters applied)

Push-In Rivets - Folding Leg

In stock In production

Pushing the pin into the rivet body causes the legs to expand and grip the material. The legs fold out to .73 mm wide. Once installed, the rivet cannot be removed from the outside of the box. Good for use with cardboard or other porous material. Available in black and natural.

{0} variants (Filters applied) {0} variants (No filters applied)

Push-In Rivets - Clinch

In stock In production

These expansion rivets can be set blind without the need for access to the back of the panel. Set by png the mandrel head into the rivet body, expanding the rivet body and causing it to flare against the reverse side. When sufficient force is applied, the mandrel will snap at its break point. Installed with a pop rivet installation tool (not currently offered by Essentra). Provides an extremely strong hold. Particularly good for soft materials.

{0} variants (Filters applied) {0} variants (No filters applied)

Snap-Together Rivets - Male/Female Mini

In stock In production

Mini Male and Femal Snap-Together Rivets are ideal to snap fit two panels together.

{0} variants (Filters applied) {0} variants (No filters applied)

Push-In Rivets - Arrow Clip

In stock In production

Push-in rivets typically require no tools for installation; they fit easily with a push. Fasten thin gauge material or lightweight components. Buttonhead ios suitable for the front of panels. Natural and Black colours available.

{0} variants (Filters applied) {0} variants (No filters applied)

Push-In Rivets - Double-ended Fir Tree

In stock In production

{0} variants (Filters applied) {0} variants (No filters applied)

Push-In Rivets - Heat Sink

In stock In production

Fasten a heat sink to a processor chip on a PCB. They have an integrated spring that provides continuous pressure to the heat sink until the thermal adhesive cures. The HSR-2 has a cross molded in allowing it to be installed by using a phillips head screwdriver

{0} variants (Filters applied) {0} variants (No filters applied)

Push-In Rivets - Push In Fasteners

In stock In production

These push in rivets provide an inexpensive, fast way to fasten object together. They may also be used as a hole plug or as push-in bumpers. The legs provide compression and expansion to lock the rivet into a pre-punched hole. Easily installed by hand

{0} variants (Filters applied) {0} variants (No filters applied)

Snap-Together Rivets - Male/Female Push

In stock In production

Also known as Assembly Clips, these two part fasteners have teeth that grip together for quick fastening. Leaves smooth appearance on both sides. Each pack includes the male and femal versions. Available in black and white. Nylon 6/6

{0} variants (Filters applied) {0} variants (No filters applied)

Push-In Rivets - Drive Fasteners

In stock In production

These drive fasteners are a multi-purpose, front loaded fastener. They have a hollow body which increases their flexibility for ease of insertion and removal. Can be used as a decorative hole plug. Easily inserted by hand. Available in both UL94 V-2 and UL94 V-0 rated materials

{0} variants (Filters applied) {0} variants (No filters applied)

Snap Rivets - Barbed

In stock In production

Also known as Assembly Clips, these two part fasteners have teeth that grip together for a quick fastening. Available with or without a slotted head for extra grip when tightening

{0} variants (Filters applied) {0} variants (No filters applied)