Fibre Optic Cable Management

We found 53 product types for Fibre Optic Cable Management

Need a Quote?

For large volumes and customised products, add to your cart and click request a quote, or email sales@essentracomponents.es and we will respond within 2 working days

Filter Products

  • of 3
List Grid

Fibre Guides - Corner

In stock In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The range also offers stacking pillars and stand-offs which can be used to stack multiple reels for compact spooling of multiple runs of fibre. Fibre Guides are used to assist with reeling and corner guides maintain a bending radius through a 90 degree turn

{0} variants (Filters applied) {0} variants (No filters applied)

Connector Dust Caps with Chain

In stock In production

Connector Dust Caps with Chains are threaded onto connector adapters when unmated to provide mechanical and environmental protection. The stainless steel material is suitable for harsh conditions.

{0} variants (Filters applied) {0} variants (No filters applied)

Strain Relief Bushings - Fibre Boot

In stock In production

Strain Relief Bushings are effortless to install as they can be inserted without the use of any tools whilst still providing protection to wire and fibre against rough panel hole edges

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Splice Trays - System, Lid

In stock In production

Fibre Splice Trays & Protectors are ideal for eliminating the potential hazard of macro and micro bends which can occur during the mishandling of optical fibres. The trays are stackable to any number and inter-tray fibre routing is possible. They can be used with splice holders, splice protectors and bend limiting tubing. The lids, trays and hinges are all sold separately or in a kit: OFST-A-P-1

{0} variants (Filters applied) {0} variants (No filters applied)

Connector Dust Caps with Lanyard

In stock In production

Fibre Dust Caps and Dust Caps with Metal Chain prevent unwanted foreign bodies and dirt getting into fibres and wires.

{0} variants (Filters applied) {0} variants (No filters applied)

Ferrule Dust Cap

In stock In production

Ferrule Dust Caps provide environmental protection for 2.5mm ferrules. The flexible TPE material is Ro. HS compliant, durable, and provides a snug fit.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Splice Trays - System, Kit

In stock In production

Fibre Splice Trays & Protectors are ideal for eliminating the potential hazard of macro and micro bends which can occur during the mishandling of optical fibres. The trays are stackable to any number and inter-tray fibre routing is possible. They can be used with splice holders, splice protectors and bend limiting tubing. The lids, trays and hinges are all sold separately or in a kit: OFST-A-P-1

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 6 Slot - 3.4mm, 2.9mm

In stock In production

6 Slot Fibre Clips are designed to hold six 3.4mm or 2.9mm diameter fibres. They can form a part of the larger EFA04 18 fibre clip which can be broken down to form individual clips which provides plenty of versatility

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Reel Accessories - Standoff

In stock In production

Fibre Reel Standoffs are mounted from the bottom of the board with SRHR-3555 rivets. The reel snaps onto the top of the standoff holding it in place

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Reels - Connecting Chain Plates

In stock In production

Connecting Chain Plates connect together to form a chain for routing fibres. Once the circle is complete, excess fibre spools to form a ‘Y’ for breakout points. These plates have a mounting hole that coordinates with wire routing devices.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bracket - Quarter Turn

In stock In production

The range of Fibre Management products supports rack brackets which mount into a 19" rack with a quarter turn. These can be used to run optical fibre alongside a racking unit

{0} variants (Filters applied) {0} variants (No filters applied)

Strain Relief Bushings - Fibre Strain Relief Gland

In stock In production

Strain Relief Bushings are effortless to install as they can be inserted without the use of any tools whilst still providing protection to wire and fibre against rough panel hole edges. Fibre Strain relief glands provide added protection to jacketed and bare fibre while routed through a hole

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing - Clips, Standoff

In stock In production

Fibre Bend Limiting Tubing can be mounted using Tube and Pip Clips such as the Standoff Clips. These are simple to install and come in two different material types

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing - 1 to 4 Breakout

In stock In production

The 1 into 4 Optical Fibre Manifold enables small multiple fibrecables with aramid and similar strength reinforcement or central. GRP strength member to be mechanically and securely terminated. The manifold is stackable, and retains tubes greater than 100N. A development kit is also available that contains all adapters, OFM-4-05-19BLK

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 3 Slot, 6 Cables, 3mm, Adhesive Mount

In stock In production

Optical Fibre Expandable Brackets are 3 slot but can hold up to 6 cables of 3mm diameter. They have an adhesive mount for easier installation

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 4 Slot, 4 or 12 Cables, 2.7 or 4.2mm,Splice Holder

In stock In production

Optical Fibre Splice Holders hold 12 x 2.7mm or 4 x 4.2mm splices and fasten with either a self-adhesive pad provided or via a screw or rivet

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 16 Slot - 3.9mm, 3.4mm, 2.9mm

In stock In production

16 Slot Fibre Clips are designed to hold six 3.4mm, 3.9mm or 2.9mm diameter fibres. They can form a part of the larger EFA04 18 fibre clip which can be broken down to form individual clips which provides plenty of versatility

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Guides - Straight

In stock In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The range also offers stacking pillars and stand-offs which can be used to stack multiple reels for compact spooling of multiple runs of fibre. Fibre Guides are used to assist with reeling and straight guides are supported by the range

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 16 Slot - 3mm, 2mm

In stock In production

16 Way Fibre Clip can be broken apart to form 3 individual clips holding 4, 4 and 8 components. A broken apart 4-way can be used in the Splice Tray EFA04 25 001

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Guides - Flexible Spacers & Holders

In stock In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The range also offers stacking pillars and stand-offs which can be used to stack multiple reels for compact spooling of multiple runs of fibre. Fibre Guides are used to assist with reeling and Optical Flexible Fibre Guide Systems are used with 250 and 900 micron fibres. The Fibre can enter and exit at any point without risk of the fibre snagging or kinking

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Reels - Base for Storage

In stock In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. Optical Fibre Support Bases are available designed for use in fibre optic patch panel applications

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Guides - Corner, Snap Together

In stock In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The range also offers stacking pillars and stand-offs which can be used to stack multiple reels for compact spooling of multiple runs of fibre. Optical Fibre Segments can be assembled for bend control around a 180 degree turn when reeling optical fibre. In a four-piece assembled mode approximately 60m of 900 micron fibre can be stored

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Reel Accessories - Stacking Pillar

In stock In production

This pillar allows for stacking multiple EFA04 fiber reels. Once the desired number of reels are stacked, they are restrained with a spring clip that is included. Pillar is mounted with an included rivet from the bottom of the board.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Reels - Winding Reel

In stock In production

Fibre Winding Reel is used with wound fibre. The fibre is taped to maintain bend radius and provide identification (tape not supplied). The two part reel is then disassembled for easy fibre removal and can store up to 8m of 900 micron fibre at a 30mm radius. The winding reels are also reusable

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing

In stock In production

Optical Fibre Bend Limiting Tubing offers the ultimate protection to fibres eliminating problems such as crushing, kinking and micro bending whilst supplying an entire self-managing solution to managing the routing of fibre

{0} variants (Filters applied) {0} variants (No filters applied)
  • of 3