(20 product groups)
These expansion rivets can be set 'blind' without the need for access to the back of the panel. Set by pulling the mandrel head into the rivet body, expanding the rivet body and causing it to flare against the reverse side. When sufficient force is applied, the mandrel will snap at its break point. Installed with a pop rivet installation tool (not currently offered by Essentra). Particularly good for soft materials.
Mini Snap Rivets snap together easily by hand pressure to combine a set thickness. They are sold separately as the male and female version, where the male version determines the maximum panel thickness it can connect.
Arrow Clips easily push into holes to fasten thin gauge material or lightweight components. Designed in either natural and black, they provide a lightweight weight and corrosion resistant solution.
Flat, beveled head eases assembly and disassembly. Easily pushed in by hand. As the pin is inserted into the grommet, the legs expand, locking it in place.
Countersunk design for flush surface. Tamper resistant design. Accomodates countersunk hole specification DIN ISO 7721. Available in black or white. Easily installed by hand.
Allows two panels to be connected from the centre so that no fastener head is visible. More durable than adhesive.
Pushing the pin into the rivet body causes the legs to expand and grip the material. The legs fold out to .73 inches wide. Once installed, the rivet cannot be removed from the outside of the box. Good for use with cardboard or other porous material. Available in black and natural colors.
These fasteners have a unique shaped key-hole interior that allows the part to collapse more completely for easy assembly with finger pressure. Tapered point of part helps guide into panel. Available for a range of hole diameters and panel thicknesses.
With a knob head, these rivets snap in and out of a hole with ease. Ideal for applications that require quick assembly and disassembly.
These Mounting Buttons push in, creating a tight locking solution that mates two objects together. The mounting arrowhead and the winged head locks it securely in place. They can only be removed from the underside of the board.
Pre-Installed pin for easy finger pressure installation. Can be mounted in a Round or Square hole. Use square hole mounting for anti-rotaion applications. UL94 V-2 rated Nylon.
These Push-in Fasteners provide an inexpensive, easy solution to join materials together where the overall thickness is up to 1.51 inches. The legs provide compression and expansion to lock the rivet into a pre-punched hole and are offered in a large range of size. They may also be used as a hole plug or as simple push-in bumper.
Easily snapped in by hand. Removable by pulling on the side taps of the pin. Allow blind side fixing. Pin and Grommet are provided separately. Can be used in a round or square hole. A square hole prevents rotation.
Our most popular and easiest to install plastic rivets! Simply push the head in and the grommet expands to hold it in place. Removable by pulling head. Available in both black and white colours. UL94 V-2 or UL94 V-0 material and also in Heat Stabilized material.
Commonly used to fix connector's to printed circuit boards. Easily installed by hand. Four different styles in a UL94 V-2 rated Nylon 6/6.
These rivets are molded and designed to be stronger than standard snap rivets. They are supplied in a one-piece design with a pre-driven pin. They are removable by pulling out the pin.
These Two Piece Rivets are designed to be used as an edge connector assembly. These are sold separately as a pin or body.
Ratcheting fasteners feature interlocking teeth that allow them to lock together quickly to provide a strong bond. Each part acts as either a male or female when combining. Their larger head diameters allow them to also be used to bond softer materials.
Snap Rivets that snap together easily by hand pressure with low profiles on each side of the part. Each pack contains both the male and female parts together.
Unscrewing Rivets are a combination screw and grommet nut that are suitable for panels and components that may need to be replaced or opened in the future. When tightened the grommet nut base expands to secure together, they can be loosened using a Philips cross head screwdriver.