Snap On Cable Clamps
(15 product groups)
Cable Clamps - Dual Half U, Snap In
Low profile for use on densely packed boards or other limited space applications. Useful for routing two parallel wire bundles. Quickly snaps into a 0.125 " hole in a 1/16 " panel. UL-recognized under #E71558. Available in three different sizes to hold bundles of 1/8 ", 3/16 " and 1/4 ". UL94 V-2 Nylon 6/6, Natural color.
Cable Clamps - Half U, Snap In
Low profile for use on densely packed boards or other limited space applciations. Good for mounting bundles in corners or along edges.
Cable Clamps - Plug In, Adjustable
Ratcheting clip grips the bundle securely. Adjustable for a wide range of bundle diameters. Good for high vibration applications. Once the clip is closed it will not open until the tab is released.
Cable Clamps - Plug In, Locking
These clamps are designed to be able to open and close for easy install and removal of wires. Large contoured base assures stable mounting.
Cable Clamps - Plug In, Standoff, Flat Side
Cables slide into wire saddle and are kept in place without the need of a locking mechanism. The round saddle design allows a wide range of cable diameters. Plug-in application allows for ease of installation. Flat side can be beneficial when space is limited. Cupped base provides stability and protects the hole from contaminants. Several spacer options to isolate the cables away from board components.
Cable Clamps - Standoff, Side Entry
These cable clamps are available various spacer lengths, and in two mounting methods; fir-tree and arrowhead mounts. The cupped base adds stability and hole coverage. The side entry allows for cable installation and revomval where space is limited on top of the clamp.
Flat Cable Clamp - Snap In, Hinged, No Tension, Removable
Snap in design allows for easy mount and can be removed from the top side of the board.
Flat Cable Clamp - Snap In, Hinged, Tension
Provides tension to flat ribbon cable to ensure stability. Convenient releasable latch allows for easy addition or removal of cables.
Flat Cable Clamp - Snap In, Low Profile
Designed for routing flat ribbon cable, serrated grip prents cable slippage. Low profile design for limited space applications.
Flat Cable Clamp - Snap In, Top Lock, Mini
Mounts over the cable into the board or chassis for a secure hold. Extremely low profile where space is very limited.
Flat Cable Clamp - Snap In, Top Lock, Removable
Designed to firmly hold down flat ribbon cable, by being mounted directly over the cable and snapped into the board. Easily remvoable from the top of the board. Very low profile for applications with limited space.
SHR clips are designed to hold the size 20 and 25 Essentra Slit Harness Wrap (SHR Series). Four different mounting types; snap-lock into either a round hole or square hole, screw mount and adhesive mount. Internal rib grips the wrap for a secure hold. Releasable latch that allows for maintenance.
Snap In Cable Hanger
One-piece design that is quickly installed by hand by fitting the strap around a cable and pressing into the hole. Many sizes are available for various bundle diameters.
Standoff Harness Clip
Gathers and routes wire harnesses. Standoff design provides spacing between the wire harness and chassis.
Standoff Locking Cable Clip
Gathers and routes wires. Locking design makes it easy to open and close with very little effort. Standoff design provides spacing between the wires and chassis.