Nylon Cable Clamps

Low profile for use on densely packed boards or other limited space applciations. Good for mounting bundles in corners or along edges. Mounts with a #4 or M3 screw and provide exceptional retention strength.

Easily mounted with adhesive. No through hole is required. Locking device holds cable in place and can be re-opened as well. Different styles, colors and material available. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.

These clamps are designed to be able to open and close for easy install and removal of wires. Large contoured base assures stable mounting.

Ratcheting clip grips the bundle securely. Adjustable for a wide range of bundle diameters. Good for high vibration applications. Once the clip is closed it will not open until the tab is released.

Cables slide into wire saddle and are kept in place without the need of a locking mechanism. The round saddle design allows a wide range of cable diameters. Plug-in application allows for ease of installation. Flat side can be beneficial when space is limited. Cupped base provides stability and protects the hole from contaminants. Several spacer options to isolate the cables away from board components.

Installed by pushing clamp onto an exposed screw or stud. Design allows for no protrusion under the chassis allowing for a clean look.

Cable Clamps provide a secure hold and are an ideal cable management solution for a variety of applications. The adhesive mount is a secure yet removable application. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.

Adhesive mount Cord Clips are a simple yet effective means to mount a cable. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.

These adhesive mount locking cable clamps come with the added flexibility of being able to be either or both screw mounted or adhesive mounted. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.

One are tension design securely holds down flat ribbon cable. Adhesive base aid in ease of installation. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.

Designed for routing flat ribbon cable, the serrated grip prevents slippage and securely grips cable. Low profile design for applications where space is limited. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.

Mounted over wires to hold them in place. Adhesive base allows for quick, secure mounting. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.

Designed with a silicone foam grip to securly hold and protect fiber and cable. Adhesive mount allows for fast but secure installation. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.

Quick and positive clamping of flat cable up to 50 conductors wide. Adhesive base allows for quick installation, and the latch allows for cables to be added and removed after installation. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.

Two tension arms hold flat ribbon cable firmly in place. Easily installed with screw or adhesive. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.

Low profile for use on densely packed boards or other limited space applications. Useful for routing two parallel wire bundles. Quickly snaps into a 0.125 " hole in a 1/16 " panel. UL-recognized under #E71558. Available in three different sizes to hold bundles of 1/8 ", 3/16 " and 1/4 ". UL94 V-2 Nylon 6/6, Natural color.

These cable clamps are available various spacer lengths, and in two mounting methods; fir-tree and arrowhead mounts. The cupped base adds stability and hole coverage. The side entry allows for cable installation and revomval where space is limited on top of the clamp.

Hinged design with tension for quick access and added cable stability. Adhesive mount allows for quick install. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.

For flat or ribbon cables Flat Cable Clamps are ideal and the adhesive mount clamps offer a secure fastening with a simple installation thanks to the adhesive base. These clamps are hinged for quick access and also offer tension for added cable stability. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.

Low profile for use on densely packed boards or other limited space applications. Useful for routing two parallel wire bundles in a 0.125 " hole for a #4 or M3 screw. Available in three different sizes to hold bundles of 1/8 ", 3/16 " and 1/4 ". UL94 V-2 Nylon 6/6, Natural color.

Adhesive Mount Adjustable Cable Clamps have a ratcheting feature to hold and lock bundles securely. Clamps can be reopened for routing changes ans are goood in high vibration applications, these clamps will not open unless tab is released. Adhesive base allows for easy installation. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.

Easily mounted by pressing into a hole using a standard 6mm hexagonal socket fitted onto the mounting head. Cables are easily inserted into or removed from the clamp where they are locked into place or can be removed for changes or replacements.

Low profile for use on densely packed boards or other limited space applciations. Good for mounting bundles in corners or along edges.

Low profile for use on densely packed boards or other limited space applciations. Good for mounting bundles in corners or along edges. Adhesive mount allows for quick and easy installation. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.

Low profile for use on densely packed boards or other limited space applciations. Good for mounting bundles in corners or along edges. Quickly snaps into a 1/4 " hole in a 1/16 " panel. Available in three different sizes to hold bundles of 1/8 ", 3/16 " and 1/4 ". UL94 V-2 Nylon 6/6, Natural color.